The above video goes away if you are a member and logged in, so log in now!
No power ps2 –
I replaced the laser on two ps2 last night.They were working fine but when i turned them off to put them back together neither one would turn back on.I checked fuses,but they seem to work fine.Could the cables be bad. Could i have burned something.Any help would be appreciated.
Check and make sure the Eject/Reset cable is in all the way, common mistake, can happen sometimes when putting it back on, also be careful of the screw there. If that doesn't work, then you may have a bad Eject/Reset cable.
yes check all the cables.
OttawaMods.com Modchip Installation & Serivces
$90CAD for Dual Firmware Mod Xbox1
$50CAD for DuoX2 Lite Chip Installed
Check out my site for more www.OttawaMods.com
I bought new reset/eject cables but still no power.The cables are in all the way.Could i have shorted something or somehow blew a fuse.No lights come on and the fan does not come on as well.
Check the FUSE on power supply.
And check with another supply