The above video goes away if you are a member and logged in, so log in now!
metal shielding –
how does the metal shielding on the side with the huge heatsinks come off? i'm trying to solder to the vias on a v9 but i cant seem to get the shield off the back of the board to come off. is there a point there needs to be desoldered from the shield? i have checked and double checked that all the screws are off the motherboard. thnx in advance!
Slide your hand under the other side of the heatsink and the board will bend a little but not enough to break and it should come off easily after you slowly get your hands under the heatsink.... That's how I usually get it off.