The above video goes away if you are a member and logged in, so log in now!
Help me fix my ps2 –
My ps2 was having a grinding problem however it was still working. Then my reset button started not to work and the only way to start the ps2 while in its idle state(red light lit) was to press the open disc tray button. I took off the tray and the disc tray and cleaned the laser eye and noticed that my reset button worked again. My ps2 worked like brand new. Put both trays back on and put all screws back in and thought i was ready to go. Pressed reset and was not working again. thought it still might work now that i had fixed the grinding problem...but did not work. I now know that the reason it was not working is due to a preoblem with the reset button. Does anyone have any ideas?
you have possibly crushed the reset cable a little when closing the station.
So when you opened it again it just on luck worked ok.
closing it again may have bent the cable enough to stop it working..
also check that none of your wires are being crimped by the metal case etc when you re-assemble the station.
try to reroot your reset wire and a goods solder joint, I had this when I took the reset wire under the board and back up through a hole by the messiah 2 chip.
when I ran it along the top of the board it stopped the problem