Fan Connection

Hi ppl!

About a year ago, I made a swtich to control a second fan on my ps2, but I've made a mistake and I screwed up the fan connection on my board.

The thing now, is that when I connect a fan to the board socket she simply won't spin.
The ps2 works fine, with a 220v fan on it, but I want to install a 120mm fan @5v.

The question is, where can I connect the fan (where are the +5v on the power supply, or the board?)

I have a V4 European ps2 with no chip (my friend who installed the messiah 2 said that it was giving some problems booting games, I think that the neo2.2 that I had for so long damaged my laser, although she now boots every original game with no problem. I will try the cog/knife trick and see what happens..)

I really need to know where are the points to solder the fan, beacuse I'm thinking on using them to the IR mod also!

Sorry about the bad English (I'm Portuguese) :p

look at a picture of a magic modchip or anyother chip that uses a 5v power source to find the point.

Found it on a Magic 2 diagram!

Tks for the info :)