The above video goes away if you are a member and logged in, so log in now!
DVD tray won't open on my PS2 V9
DVD tray won't open on my PS2 V9 –
One day i tried to open the DVD tray on my PS2 (SCPH5004), the Eject LED is only flashing. I opened up the PS2, checked the engine for the tray and the engine is only going one way. The home switch is working.
Maybe a IC is broken?
I found a IC called BA5815FM, I think this is for the tray control, but I'm not sure.
Maybe the easiest way is to replace the mainboard?
Someone who can help me?
sounds like the classic LA problem on v9 and 10's. The LA chip (on the opposite side of the board from the BA) normally goes and caused tray / laser problems. checked all the fuses and laser coil resistances. you can but spare LA chips but you need to know what your doing to replace the chip - very fine solder work.
All of the fuses are ok and the LA was replaced for 2 months ago and Romeo fix is done too. This is a very strange problem.
weird - check the ribbon cables where they plug in. I've seen quite a few cables where the tin connectors have started peeling away from the ribbon cable.