The above video goes away if you are a member and logged in, so log in now!
CodeBreaker Issues FMCB V1.8 on MC
CodeBreaker Issues FMCB V1.8 on MC –
FMCB V1.8 on Official MC
I'm trying to install Codebreaker to my MC and keep getting black screen
I have looked at many videos on youtube, searched google, and finally found this site and searched here.
What I have done so far
Codebreaker V10 elf
codebreaker V10 patcher
Used my HDLoader elf renamed it to CB_launch
this site says
codebreaker 9.3 patcher
esr elf renamed to CB_launch
From what Ive watch this is what I did
1. placed the patched codebreaker elf and renamed cb_launch files into the MC0:/Boot
2. Set Item in OSDSYS configuration for Codebreaker set path to MC0:/boot/CodebreakerV10 elf
3. Saved cmf to MC0:
I see the newly added Codebreaker on the main menu of FMCB, selected it, I get a Loading screen then Black screen.
Removed Jump drive from PS2
Tried other CB file and renamed ESR
tried two different jump drives
This site even suggested turning off fast boot and setting the ule to disc control on
Am I missing more files?
I dont have a cheats file like on the video although I did find another post on here about the issue and they posted a PCB folder that had a cheats txt
They said either copy the PCB folder to the root of MC0: or just the Cheats txt to the Root of MC0:
Search for this one CB92_GSHI_NC.ELF . And the cheats file is not a TXT , it's just cheats , should be placed inside the PCB folder .
Use a card of minimum 16MB , i noticed that it would blackscreen when i used an 8MB one
The ELF will load any ELF file in the following paths, instead of launching CD/DVD...
Originally Posted by IndigoChild
"?" means region code.
These are the instructions i used. I don't know if the file extension needs to be lower case when named CB_launch.elf. That won't stop it loading though as that runs after Patched CodeBreaker. Have you tried running from USB with uLaunch. Check the size of CodeBreaker.ELF in uLaunch, if its zero, delete it and recopy it. How much room do you have on your memory card, maybe it needs to write something to it before booting. CodeBreaker takes 10 seconds or more to load. It works from my Sony card. I have tried it with renamed ESR & OPL, they both work. Some people set it up to run uLaunch then select the next loader from there. Did you patch it yourself or was it already patched.
Have you seen this thread http://psx-scene.com/forums/f19/code...oad-hdl-57901/ (Codebreaker patched to load HDL)
I believe that the solution to everones black screen issue is due to the size limitation of a standard MC. After further investigation it seems that the CB requires a MC of 16mb or greater. I am using my Kingston 1Gb Usb stick.
So, the final setup for the CB to work for me.
PCB folder in the MC0:/root
CB_launch in the MC0:/root
Codebreaker elf on Mass:
Goto OSDSYS configure set an item for Codebreaker set path to path1 Mass:/codebreaker elf
Thank you all...
Maybe this could be a great sticky for other like me.
NExt Adventure. Is it possible to find a codebreaker elf for PSone games to work the same way on FMCB?
It works on my 8MB Sony Memory card, so does SwapMagic 3.8. The only way i could get SwapMacic on there was with AR Max. Tried it with uLaunch and CodeBreaker, they both failed. Even the Sony browser could not copy it to another card, it copys CodeBreaker okay.
Originally Posted by IndigoChild