Alt power pt for PS2daddy

1 Attachment(s)

Hi all - thought this may also be of use to some of the rest of you.

ps2daddy has asked me the question on how I connect the Messiah and DMS3 power point - as he is having some trouble getting it to connect.

Quote:

Its the power point by fuse ps14 to be exact

Personally I use 7 core (stranded) AWG 22 wire.

There are a stack of places in the one area that you can choose from to connect the wire to - if it is a V7... (BTW - ps2daddy if it is not the V7 you are talking about let me know and i will post other pictures)

Choose which ever you find easiest to connect to. There are more places around the PCB as well that can be used - but these were easiest for me to show as I happened to have a picture of the locations already taken.

see attached diagram - the purple highlighted parts.

Any will do fine - so try soldering to each, and the one you find easiest is the one you should use from now on.

As you can see by the picture - I add a solder blob to the connection point before attempting to attach the wire. I then also tin the wire and solder them together.

If you were after slightly different info let me know and I will see what I can provide.

Thankyou sir

I just hate that regular point in the diagram
Ususally I just flux all the other points but I will try tinning the power point first my next dms2/messiah 2 mod.

I always get my mods to work fine but I would spend dang near 15min trying to get this one point done just right

hehe those are great points i use themm all the time.(the one on teh fuse)