The above video goes away if you are a member and logged in, so log in now!
Rebug 4.xx Update Guide08-22-2013
Rebug 4.xx Update Guide08-22-2013 –
UPDATE 8/22/13: Added information for newest firmware 4.46 REX
Note: It is always a good idea to very the MD5 of any PS3UPDAT.PUP when it is on your USB stick ready to be installed.
REBUG_4.46.1_REX_PS3UPDAT.PUP – 8acb7b9cb5129bb95c4a35d31978edb8
REBUG_3.55.4_REX_PS3UPDAT.PUP – 46541c4f97604068c05e363412478df5
REBUG-TOOLBOX-02.01.05.pkg – a5b7f5ce90ac43c3b8dfa1060b38c358
IMPORTANT!!: Remember to remove any game disc you might have left in the drive before any firmware installation.
IMPORTANT!!: Turn off any firmware version spoofs if possible.
GENERAL UPDATE PROCEDURE:
USB stick formatted fat32.
Updates must be set up like this 'USB:\PS3\UPDATE\PS3UPDAT.PUP'
In XMB go to 'Settings' > 'System Update' > 'Update via Storage Media'
1a) If you are currently on 3.55 OFW you can now start by directly installing 4.46 Rebug through XMB
since QA can now be enabled on CFW higher than 3.55
1b) If you are on an OFW lower than 3.55, start by installing 3.55.4 Rebug through XMB
1c) If you are currently on a different CFW such as 3.55 Kmeaw you can start by getting a backup of the flash chip and
Enabling QA with Rebug Toolbox before the actual firmware is installed, just to be safe.
2) Install REBUG TOOLBOX 02.01.xx PACKAGE
If you are already running Rebug firmware you can find it in Package Manager>Install Package Files>PS3 Hard Disk in the XMB.
You can also find the package on the official Rebug site if you are on a non-Rebug CFW.
3) GETTING A FLASH BACKUP
Run Rebug Toolbox. Go to the Utilities column and 'Export Flash to File'.
This will make a backup of your NAND/NOR to a USB stick. If it gives you an error try switching USB ports.
4) ENABLE QA
Also in Rebug Toolbox, go back up in Utilities to 'Toggle QA Flag' and switch it to 'Enabled'.
5) If you started with 3.55.4 or non-Rebug CFW and now have your backup and QA Enabled, install Rebug 4.46 through XMB.
6) If you are upgrading from an older Rebug firmware to 4.46, make sure you install the included REBUG TOOLBOX 02.01.05 package.
Run Rebug Toolbox again. Go to the second column 'System Mode' and switch it from 'Normal' to 'Rebug'.
Last edited by bitsbubba; 08-23-2013 at 02:02 AM.
I moved it to the Rebug sub-forum (please keep a mental note that one does exist for these types of topics).
And I stickied your tute, so it can be found at the very top section of the Rebug sub-forum.
PS3: Slim 320GB / CFW KMEAW 3.55 / multiMAN v04.xx.xx / blackb0x FTP Server v1.2 3.55 w/ FlashFXP 4.2.x
PS2: SLIM & PHAT / FreeMcBOOT w/ESR & OPL 9-r651 / SMS w/PSClient v1.3.1
PSP: PHAT / 5.00 M33-6
You might add to first :
* Remove disc from BD drive
* Remove any spoofs that may be active
I never really had a problem with spoofs (never had to remove them, IDK) but yes definitely REMOVE ANY DISC from the drive (I actually downgraded when I did it, QA flag enabled but many have accidentally updated)
Originally Posted by codone
CECHA01 (500GB Cobra 7/ REBUG REX 4.46 XMBM+, multiMAN/webMAN XMB, Showtime,)
Thanks for the suggestions I added them into the original post.
But what If I am on REBUG 4.21 REX in DEX mode? ._. , and I want to Install Rebug 4.30.02 REX?
I think you need to switch it back into CEX mode with the Toolbox before you install the update, although I'm not 100% sure about this as I have never tried to install a Rebug update while in DEX.
Originally Posted by shadowXtreme
just to be sure i dont brick my ps3. im currently on 3.41ofw, can i just directly update to REBUG_4.30.2_REX without any issues?
Yes this should work fine, before the newest update I would always stop at 3.55 CFW just for enabling the QA since it was the only way to do it, but now that is not necessary. You could go to 3.55 OFW first also, a lot of people do that, but in my experience its not necessary either when using Rebug firmwares.
Originally Posted by hulk
After thinking about Hulk's question I went and looked at Rebug's install instructions and noticed this:
"From XMB install REBUG 4.21.x AND HIGHER over any 3.55 OFW/CFW/MFW or the same or lower firmware version CFW with spkg sig check patched or any firmware version CFW with spkg sig check patched and QA enabled.
From XMB install REBUG 3.55.x REX EDITION over the same or lower firmware version OFW/CFW/MFW or any firmware version CFW/MFW with spkg sig check patched and QA enabled."
Because of this I have added back the information about Rebug 3.55.4 as I cannot recommend installing 4.30.2 over a lower firmware than 3.55.