How enable spoof?
I've small problem with enable spoof, because no matter what i do it doesn't work.
I've instal - Rebug Update Package 0.7 (3.55.2) and Spoof 4.11.
I pres buttons L1 and cross, but in system information i still have 3.55 software version. Also after pressing L1+x nothing happend it just work like press X, start some application with was selected. but properly system should restart themself,
any suggestion about my problem?
you need to install the rebug selector v1.6.1. go to package manager install package and install from internal HDD. Use it to set the system into rebug mode. that will enable the spoof as well as the debug features.
just installing the pkg files does absolutely nothing except give you some new icons. You need to run them and follow on-screen instructions to install and activate.
The 0.7 update is for Rebug firmware only. After installing you'll need to also install Rebug Selector 1.6.1 (found in your package menu after updating) and run that as well
The 4.11 spoofer is for every firmware except rebug. Make sure you run it and follow instructions on installation and activation
I've instal Rebug selector . i enter them and there is information that i have normal version (i presed L1+x)system restart, but still i've 3.55
i need to add 1 thing when i install spoofer i pressed x and screen get black for a while and after that it get back into XMB is it normal? Should i install spoff under normal mode or rebug?
You want to be in rtebug mode. Are you using the rebug firmware? if you are you have no need for a spoofer just install the update as Bahamutlord said and use the rebug selector tool to set into rebug mode using either retail or debug XMB. thats it. If you are on another CFW use the spoofer and activate as normal.
ok everything is working now great.
i've just didn't know that there is no need to instal spoof if i have rebug firmware and i thought that it will automaticly launch spoof after instal it.
However now everything is working great.
Thanks everyone for help