Printable View
How can i change the settings to see if i can get the image? you could tell me in steps like first push start then go 3 times down and press cross, something like that to prove luck
EDIT: Experimenting with the ulaunch display settings i discovered when i put PAL and disable interlace the image go away like pgen, but if i put it on the image returns. And if i put NTSC and interlace off, the image don't dissapear. I don't konow if it's a clue or not to you :P
If shinny wait few sec after loading elf
down 1 hit x
down 8 hit x until you see something if you don't something wrong on PS2 setup
i don't see nothing.. u.u i don't know what to do
can be something of ulaunch??
I wouldn't think most versions of uLE should work with it but you could go to post their and update if you have an old one
So your ps2 works with normal games and stuff but not this strange if you have NTSC TV and PAL system my be the problem
I am at a loss to why thou you could get GSM and try to force V mode just tried it myself and GSM can force this to 480p mode
Thanks man with GSM worked i forced to NTSC and now work :P thank you very much!
It seems i have to open gsm every time i want to play with pgen xD better than nothing :B
Cheers!
EDIT: i can't see any roms xD is in .md format
Wah - so difficult way for so simple action.Quote:
Originally Posted by jonikpo
Guys you have to read readme more carefully. From version 1.2 there is such a function which can change video mode "on fly".
and that's all. No need to use it with GSM. Maybe this problem appears because i add test video VGA mode (640x480).Quote:
At any time in the GUI you may change the video mode. |
| Hold down all shoulder buttons (L1 + L2 + R1 + R2) and then press |
| START to change to NTSC or SELECT to change to PAL.
As for .md format i just forgot about it. This will be fixed in the next revision.
Dang forgot about on the fly video :facepalm:
Live and learn :)
GSM was just experimenting with 480p ;)
This still will not work with component cables correctly without force mode BTW
Going to sticky this this is working well compared to last time I used it :)
You're the best man! thanks for keeping updating the emulator!:applaud:
Ok there is new version: pgen_rev21.zip
USB driver updated
VGA mode now is working (probably?)
now it is not possible to map "X" as "pause"
*.md format now is accesible
So can somebody test VGA mode? It is now accessible from options menu. Unfortunately i have only simple ps2 cable so i cannot test it on real hardware.
I would test it for you but I only have component and composite but will test this out all the same :D
one nice improvement now it loads off of USB fast like MC and Hard drive :)
Hope you can find a way to fix Component problem thou black for all modes except VGA and of course small pink in corner:lol: