Converting an Elf file from NTSC to PAL?

[micah1880]

Is there a way to do this?

I have Geotron but you can only get it in NTSC and I'm after it in PAL format. Any help would be amazing.

Thanks

[nesianstyles]

newer pal tvs support ntsc, atleast mine does.
What method of booting disks do you use? You can change it in Swap Magic before you load it.

[micah1880]

I have a ModChip but I'm currently booting GeoTron from my memory card.

The problem is that it's an old TV. I should be getting a new one soon, but until then I just wondered if there was any way of converting it.

[broodje]

BOOT2 = cdrom0:\WHATEVER.ELF;1
VER = 1.00
VMODE = PAL

[micah1880]

Where do I need to change that code?

I'm just booting geotron.elf.

I'm using uLanchELF, then file browser, then just booting the elf file from my memory card.

I tried going into the config in uLanchELF and changing the setting from AUTO to PAL, but that didn't work.

I'm a bit out of my depth, I think.

[broodje]

oooh, i get it. Well u could try to load it from a cd and make a txt file, with the settings i just gave u.

then save that txt file as SYSTEM.CNF, and put it on the CD.

remember, WHATEVER.ELF should be the name of your elf file ofcourse

[nesianstyles]

you could put it on a CD, but it would be a waste.
try something like this:
http://www.geocities.com/jayteemaste...fix_source.zip

[micah1880]

you could put it on a CD, but it would be a waste.
try something like this:
http://www.geocities.com/jayteemaste...fix_source.zip

That program didn't work but I found a similar one that did. Thanks a lot for your help.