E3 Card Reader Manual to break PS3
When you first install your new E3 card reader, simply insert into pc, after a few seconds, PC will display 3 drives., They will be E3_4M_Stick DISK, E3Upgrader DISK and Removable DISK(SD slot)
E3_4M_Stick DISK is 4MB FLASH on board, to save any software smaller than 4MB
E3Upgrader DISK is specially for upgrade E3 Card Reader firmware
Removable DISK(SD slot) is for Micro SD, Max supporting to 32GB, can save any software into it
Now download e3 card reader firmware from internet(they are free), and copy into E3Upgrader DISK, 1 second fininsh programme, and blue light lighting
Then can break ps3 with e3 card reader, same way as other chip..
How to use Dual Boot Mode
After upgrade E3 with e3 firmware, it boot ps3 with Hermes V4B FW.
If you insert Micro SD into e3, even a blank SD, it will boot ps3 with Kakaroto FW.
How to use free PSGROOVE
After upgrade E3 with e3 firmware, then do as following:
1: Download any PSGROOVE, if it is hermes fw, change name into h, so will be h.hex , and copy into E3_4M_STICK, then can break ps3 with free hermes fw (any version hermes fw works)
2: if it is Kakaroto fw, change name into k, so will b k.hex , and copy into E3_4M_STICK, then can break ps3 with free Kakaroto fw (any version Kakaroto fw works)
becareful need change into small letter.
How to copy backup manager. Download and copy into E3_4M_STICK.
E3 Card Reader have lots of other function, it will make public later.