The above video goes away if you are a member and logged in, so log in now!
For use as some schematic that need RB5:
Set the "RB5" pin to GND for enter the BOOTLOADER mode
For use as "Custom-Bootloader-Hex-MP-Schematic" board:
Set the "RB7" pin to GND for enter the BOOTLOADER mode
If without this yellow sticker , then mean it's not a official product.
The Max-Pic come with the "F0" LED demo firmware when selling, so it's legit product.
When you get this kit first time, you should put it to USB port directly, to see it works or not.
The LED demo flow:
 first all LEDs will turn on and keep 2 seconds around.
 then all LEDs will turn off, and start to blinking one by one, and loop.
Now you can try to enter the BTL upgrade mode, just press the RED RESET/BTL button, you should see the RB4 and RB5 blinking very fast,
and PC can detect one "HID compliant device", now is in the BTL mode already, the firmware updater should can detect your kit also.
The retail packing:
The PCB layout:
will upload more details soon.
nice, this is suitable for more complicated projects too!
Yes, you can even use it as a xbox360 nand flasher
Originally Posted by keropi666
This reminds me a D2sun product!
Awesome can't wait to get mine. Just one question Patrick how much flash memory does it have ? 16? 32? 64? 128?
AWESOME! This looks really exciting to mess around with.
I could have really used this last week when I was JTAGing my Xbox 360 through a DB-25 port... lol.
Thanks for the write-up Patrick.
Last edited by remainnameless; 10-14-2010 at 10:20 AM.
Wow, looks godly . Now I might consider collecting money to get xbox 360 and have both consoles: ps3 and x360. Can't wait to get my hands on it. Thanks for giving us information about this product.
Last edited by Bolec; 10-14-2010 at 10:56 AM.
now this looks like a quality product we have here. now i'm anticipating the test kit a little more. it can do quite alot with doubling as a JTAG device.