X3Jailbreak/X3Max Sample Review

[JRM]

hi, i have received the x3jailbreak too but i don't have the file for flash and program it... anyone can post it? thnx

It hasn't been released yet its supposed to be released today (Sept 27) so we will wait and see .

[GigaSonic]

i know i know... and its' october, not september....

• Click here to download X3 Programming Tool (10/27/2010)

but i hope there's a download for the tester who have received the key...

[Dotz]

wow we have to wait another month that sucks i wanted to make the video right away

[corsasri]

Well i thought it was today that it was released to, Why are they taking so long to release the software tool and there dongle ?
well i will still use my teensy for now.

[corsasri]

We could find out what chip they have used and program the dongle sooner. We could try the major usb development board program tools.

[corsasri]

tryed the atmal flip program no joy

[talmagal]

Programming tool released attached below along with the bin files. cant test as im at work if anyone can look at the bin files and get a chip name that would be nice

Once you receive your X3 Max you will need to visit http://x3max.com/downloads and download the X3 Programming Tool and a file you wish to program your X3 Max with.

After you have download both of these two items you will need to extract x3Toolv1.0.rar on your PC and you will need to extract the code you would like to program on your X3 Max in to a directory.
(We suggest that you extract the X3 Max code into your X3Toolv1.0 directory.)

Now that you have everything that you need on your PC, you will need to toggle the switch on the back of the X3 Max to the ON position (Programming/Boot loader Mode)
then you will plug your X3Max in an open USB port of your PC

Then you will go to the directory where you extracted the X3Toolv1.0 and from here you will launch the X3Tool.exe.

Once the X3Tool is loaded on your PC you should see that it has " Connected " with your X3Max.

(If it has not connected then your switch is not in the ON position)

After the X3Max is connected then you want to open and select the Code that you wish to program your X3Max with.

Once the Code has been selected you may now click on the Program button. You will see the X3Tool programming your Code to your X3Max.
Once the program has been transferred to your X3Max you will get a message the " Programming Complete " .

You may now click disconnect and close the X3Tool application and remove your X3Max from your PC

[corsasri]

there is no code on there site to flash the chip. what hex are we supposed to use ?

[talmagal]

there is no code on there site to flash the chip. what hex are we supposed to use ?

attached to post somehow logic sunrise got some bin files idk what chip it is to say what to use but i attached the ones from there

[corsasri]

yes the files from logic sunrise work.