The above video goes away if you are a member and logged in, so log in now!
I think the Teensy 2.0++ has 128KB... Correct me if im wrong. http://www.pjrc.com/teensy/
Originally Posted by IlPrincipino
The PSBreak (PS3Break) is based off of a PIC18F2550 which only has 32KB memory.
Originally Posted by tonybologna
guys dont worry, I am killing my self to make the replacements for the at90usb162. I already have 7500 atmega168 chips and i will make another one for atmega644p chips for asbestos. so dont worry.
I already have 7500 atmega168 chips
Well much happier with the chip made by ps2chiper now i have switched the leds, very simple and quick job switching and works a treat with the new hermes hex and open manager 1.3
One tip for those wanting to desolder and resolder, mark one end with a marker so you dont put it back on the same way you took it off, very hard to tell the difference (although that could be down to me and my eyesight )
I find it a bit hard to find hex files for this dongle.
At volumerates there is one PSGroove 1.1 File linked.
But I cant find a hex for the hermes 1.0...
It seems to use the same hex as the Teensy 1 but can I really use the same hex files?
I just cant find the info that the teensy 1 also runs at 8mhz.
I've ordered one of these but was wondering what hex files i could use to update it? does any 16kb (like teensy 1) hex files will work with it?
Cant wait to get mine,got stung with a pic ps3break so ordered this same day should have just got this first day lol