Problem with PS3Key updates.

[missingdata]

So I updated my PS3key to v2.2 and it was working fine. But now, I want to update it to v2.3 and it's doesn't work.

After inserting the PS3key, the led starts off with red and remains blue (not blue and red together). And the "Update now" button in PS3KeyUpdater remains grayed out. No matter how many time I remove and insert the PS3key. Anyone got this problem?

[Joe88]

you have to remove and insert it quickly before the led changes from red to blue

[Snifi]

and if that doesnt work, try this, but be very carefull:

1. open the case of the stick
2. connect the reset pin with ground or case of the stick laying on the table (picture)
3. attach the stick
4. wait a bit
5. detach the stick
6. remove connection between reset and ground/case
7. reassemble the stick
8. try to update the normal way

found it here

tell us if it worked

[jetcat]

I had a similar problem and my solution was....
You have to use the 1.1 updater.That worked for me

[atman7]

what I did was take it out every 2 seconds on the fourth time it changed to blue and it you could update, try using 1.1 updater too worked for me with what Ive posted