KIOSK - PS3KEY DOWNGRADE - Added Video Running 3.41 Debug on Retail Unit (page 2)

here is the log updating an untouched 3.15 40gb retail to debug:
I get the crazy beeps when trying to boot into the system after bringing it out service mode. Even though the log says manufacturing updating SUCCESS(0x8002f000) it does not work.
There are a few more things I am going to try because I know there has to be a way to get this to work...

Code:

manufacturing updating start PackageName = /dev_usb000/PS3UPDAT.PUP settle polling interval success vflash is disabled... boot from nand flash... creating flash regions... create storage region: (region id = 2) format partition: (region_id = 2, CELL_FS_IOS:BUILTIN_FLSH1, CELL_FS_FAT) create storage region: (region id = 3) format partition: (region_id = 3, CELL_FS_IOS:BUILTIN_FLSH2, CELL_FS_FAT) create storage region: (region id = 4) format partition: (region_id = 4, CELL_FS_IOS:BUILTIN_FLSH3, CELL_FS_FAT) create storage region: (region id = 5) create storage region: (region id = 6) Initializing taking a while... start Updating Proccess Initialize elapsed time = 93 msec check UPL Check UPL elapsed time = 46 msec check Package Size get package size elapsed time = 8 msec start Updating Package Update packages num = 27 Update packages total size = 147097842 Update Package Revoke list read package revoke list package (576 bytes) elapsed = 20 msec update package revoke list elapsed = 110 msec Update Package Revoke list done(0x8002f000) Update Core OS Package read core os package (5228918 bytes) elapsed = 256 msec update core os package elapsed = 2000 msec Update Core OS Package done(0x8002f000) Update VSH Package sys_memory_container_create() success(id = 0xc0effffe) Update VSH's package : 1/19 read vsh package (1696 bytes) elapsed = 13 msec decrypt and verify vsh package elapsed = 26 msec write vsh package elapsed = 7339 msec compare vsh package elapsed = 0 msec Update VSH's package : 2/19 read vsh package (5616387 bytes) elapsed = 273 msec decrypt and verify vsh package elapsed = 345 msec write vsh package elapsed = 1781 msec compare vsh package elapsed = 402 msec Update VSH's package : 3/19 read vsh package (3357775 bytes) elapsed = 171 msec decrypt and verify vsh package elapsed = 231 msec write vsh package elapsed = 3123 msec compare vsh package elapsed = 312 msec Update VSH's package : 4/19 read vsh package (5240116 bytes) elapsed = 259 msec decrypt and verify vsh package elapsed = 314 msec write vsh package elapsed = 2766 msec compare vsh package elapsed = 401 msec Update VSH's package : 5/19 read vsh package (24839 bytes) elapsed = 22 msec decrypt and verify vsh package elapsed = 29 msec write vsh package elapsed = 1317 msec compare vsh package elapsed = 9 msec Update VSH's package : 6/19 read vsh package (9852384 bytes) elapsed = 474 msec decrypt and verify vsh package elapsed = 295 msec write vsh package elapsed = 11647 msec compare vsh package elapsed = 484 msec Update VSH's package : 7/19 read vsh package (10268746 bytes) elapsed = 489 msec decrypt and verify vsh package elapsed = 286 msec write vsh package elapsed = 17628 msec compare vsh package elapsed = 518 msec Update VSH's package : 8/19 read vsh package (6873237 bytes) elapsed = 325 msec decrypt and verify vsh package elapsed = 360 msec write vsh package elapsed = 11797 msec compare vsh package elapsed = 424 msec Update VSH's package : 9/19 read vsh package (8625010 bytes) elapsed = 417 msec decrypt and verify vsh package elapsed = 223 msec write vsh package elapsed = 4960 msec compare vsh package elapsed = 385 msec Update VSH's package : 10/19 read vsh package (10422267 bytes) elapsed = 505 msec decrypt and verify vsh package elapsed = 263 msec write vsh package elapsed = 5447 msec compare vsh package elapsed = 469 msec Update VSH's package : 11/19 read vsh package (9235868 bytes) elapsed = 452 msec decrypt and verify vsh package elapsed = 244 msec write vsh package elapsed = 11348 msec compare vsh package elapsed = 450 msec Update VSH's package : 12/19 read vsh package (10385441 bytes) elapsed = 503 msec decrypt and verify vsh package elapsed = 263 msec write vsh package elapsed = 5960 msec compare vsh package elapsed = 480 msec Update VSH's package : 13/19 read vsh package (8982580 bytes) elapsed = 435 msec decrypt and verify vsh package elapsed = 222 msec write vsh package elapsed = 3556 msec compare vsh package elapsed = 411 msec Update VSH's package : 14/19 read vsh package (9450420 bytes) elapsed = 460 msec decrypt and verify vsh package elapsed = 370 msec write vsh package elapsed = 7692 msec compare vsh package elapsed = 484 msec Update VSH's package : 15/19 read vsh package (9296157 bytes) elapsed = 454 msec decrypt and verify vsh package elapsed = 358 msec write vsh package elapsed = 17199 msec compare vsh package elapsed = 503 msec Update VSH's package : 16/19 read vsh package (9011000 bytes) elapsed = 444 msec decrypt and verify vsh package elapsed = 397 msec write vsh package elapsed = 23909 msec compare vsh package elapsed = 644 msec Update VSH's package : 17/19 read vsh package (6671544 bytes) elapsed = 340 msec decrypt and verify vsh package elapsed = 322 msec write vsh package elapsed = 21480 msec compare vsh package elapsed = 793 msec Update VSH's package : 18/19 read vsh package (8693374 bytes) elapsed = 430 msec decrypt and verify vsh package elapsed = 219 msec write vsh package elapsed = 2599 msec compare vsh package elapsed = 490 msec Update VSH's package : 19/19 read vsh package (7212053 bytes) elapsed = 359 msec decrypt and verify vsh package elapsed = 362 msec write vsh package elapsed = 17129 msec compare vsh package elapsed = 665 msec Update VSH Package done(0x8002f000) Bul-ray Disc Player Revoke read bdp revoke package (1904 bytes) elapsed = 29 msec decrypt and verify bdp revoke package elapsed = 32 msec write bdp revoke package elapsed = 2538 msec compare bdprevoke package elapsed = 58 msec Bul-ray Disc Player Revoke done(0x8002f000) Update Program Revoke list read program revoke list package (736 bytes) elapsed = 16 msec update program revoke list elapsed = 337 msec Update Program Revoke list done(0x8002f000) move_2block_status_into_the_region(): region id = 3 rewrite_region() region id = 0x3, start_lba = 0x0, end_lba = 0x4000 rewrite region done (ret = 0x8002f000) rewrite region elapsed time = 1307 msec touch_1st_sector_in_block() region id = 0x3, start_lba = 0x0, end_lba = 0x4000 touch_1st_sector() done (ret = 0x8002f000) touch_1st_sector() elapsed time = 1275 msec rewrite_region() region id = 0x3, start_lba = 0x0, end_lba = 0x4000 rewrite region done (ret = 0x8002f000) rewrite region elapsed time = 1309 msec Update BD firmware read BD firmware package (1966992 bytes) elapsed = 121 msec update BD firmware elapsed = 186 msec read BD firmware package (951040 bytes) elapsed = 76 msec update BD firmware elapsed = 146 msec read BD firmware package (951040 bytes) elapsed = 73 msec update BD firmware elapsed = 146 msec read BD firmware package (951040 bytes) elapsed = 69 msec update BD firmware elapsed = 146 msec read BD firmware package (1639296 bytes) elapsed = 102 msec update BD firmware elapsed = 154 msec read BD firmware package (787200 bytes) elapsed = 65 msec update BD firmware elapsed = 144 msec read BD firmware package (1639296 bytes) elapsed = 106 msec update BD firmware elapsed = 154 msec Update BD firmware done(0x8002f000) Update Multi-Card controller firmware read MCC package (28636 bytes) elapsed = 34 msec update MCC elapsed = 28 msec Update Multi-Card controller firmware done(0x8002f000) Update BlueTooth firmware read BT package (644322 bytes) elapsed = 59 msec update BT elapsed = 59 msec Update BlueTooth firmware done(0x8002f000) Update System controller firmware read SC patch package (4864 bytes) elapsed = 26 msec read SC patch package (4864 bytes) elapsed = 27 msec read SC patch package (4864 bytes) elapsed = 29 msec Update System controller firmware done(0x8002f000) update package elapsed time = 215561 msec post processiong... post processiong done cleanup update status (ret = 0) os version = 03.4100 build_version = 45038,20100721 region of core os package = 0xa0000000 build_target = DEX-ww build target id = 0x82 manufacturing updating SUCCESS(0x8002f000) set product mode (ret = 0) Total Elapsed time = 219391 msec

Could it be that its not booting because its not technically in debug mode, and that the selfs in the firmware aren't signed?

Quote:

Originally Posted by Mark Webber

You sir, now own a retail unit =)

holy shit!! gonna be the next tester for this as i have a 60gb demo as well, thanks again mark!! (2nd time now :cry:)

Quote:

Originally Posted by xbox1513

Do i have to be on 3.41. Can i be on a lower firmware, and upgrade instead of downgrade. If i have to upgrade can someone post the link :D.

what were you looking for?

Quote:

Originally Posted by evilsperm

Go compile chokolo's payload and convert it to hex. then use his 2nd payload to do the decrypting. You will need to use spu_pkg_verifier (that's an isolated module) in graf_chokolo's payload. Just decrypt the .tar.aa files one by one and then extract them one by one.

Good work copy/pasting stuffs I tell you in pm....

Quote:

Originally Posted by evilsperm

Go compile chokolo's payload and convert it to hex. then use his 2nd payload to do the decrypting. You will need to use spu_pkg_verifier (that's an isolated module) in graf_chokolo's payload. Just decrypt the .tar.aa files one by one and then extract them one by one.

Which payload is the second one? I only see one payload, unless theres a switch or something similar in the source.
And, I'd run the .tar.aa files through spu_pkg_verifier.self to decrypt it?

Quote:

Originally Posted by mathieulh

Good work copy/pasting stuffs I tell you in pm....

Sorry math I was being asked in PM's for dumps and figured that info might as well be public because I am not going to release any dumps or decrypt anything for anyone.

I should have stated that you had sent that to me in a PM.

So does anyone actually have it working if so please post a video and to do this do you need a first gen ps3 with ps2 compatibility

Quote:

Originally Posted by Rodney

So does anyone actually have it working if so please post a video and to do this do you need a first gen ps3 with ps2 compatibility

You do it like a normal downgrade, just replace the .pup file with the debug one.
and I think you need a first gen ps3.

also @evilsperm, mind telling us those things you are going to try? :)

Quote:

Originally Posted by Pyong

You do it like a normal downgrade, just replace the .pup file with the debug one.
and I think you need a first gen ps3.

also @evilsperm, mind telling us those things you are going to try? :)

I did that, I have a first gen ps3 and i got the awesome beeps