Can't regiter / can't put it in update mode

[Blaze]

My ps3key arrived today. It has a yellow sticker in it, but i can't register my serial number, (i'm getting a "Invalid serial number - please check that you have entered your serial correctly." error).
And i can't put it at update mode, i've inserted it and removed it a dozen times but not getting both light up at the same time.
A few seconds after insert the pen, the light turns blue and windows 7 recognize it and install drivers as a generic usb. when i enter in it i have this information:
PS3Key
Bootloader: 1.03
Firmware: 1.0c 3.41
UIN: 0001-8BB7
© PS3Key.com 2010

I think i have a real ps3key version, so i don't understand why i can't register it and put it on update mode

[stepping]

I think you have the new Version of the Key.

yes ps3key updates are really slow
however new ps3key will use silicon chips and dont' need anymore flip or software updater, i will get the new stock on 19 probably, however here what they told me


"The SiliconLabs IC actually has some exciting features, one of which is a
much better way to perform updates: After inserting the dongle into a PC,
it will show as a "USB Flash Drive" and then it's simply a matter of
dragging-and-dropping the update file onto the USB drive and the
PS3Key/AVRKey will be updated! No application needed!"

the question is: which update file? every hex file or only some hex file?

Here a picture from the new Key: (The one which is so called "fake")

i55.tinypic.com/24ci1on.jpg

And here the specifikations from a user from an other forum: (it looks like if you have now 64kb instead of 32kb-flash)

PS3Key:

Kapazität: 68 KB (68.096 Byte)
Wechselmedien: Ja
Absteckbares Laufwerk: Ja
BSD-Name: disk4
Produkt-ID: 0x0090
Hersteller-ID: 0x3752
Version: 0.00
Geschwindigkeit: Bis zu 12 MBit/s
Hersteller: ZPM Corp.
Standort-ID: 0x13200000
Verfügbare Stromstärke (mA): 500
Erforderliche Stromstärke (mA): 30
Partitionstabellentyp: Unbekannt
S.M.A.R.T.-Status: Nicht unterstützt

[Blaze]

...After inserting the dongle into a PC,
it will show as a "USB Flash Drive" ...

Yup is exactly what happens to my mine. but i have no access to downloads, so i can't try to update the dongle that way, i've sent a mail to them explaining my problem, recived a mail a few minutes layter saying:
"Please send the code to me and I will check

Regards
PS3key Team"

But until now, more then 24 hours later, i got no response

[ocdetective]

Yellow sticker = avrkey NOT PS3Key. PS3Key has a GREEN sticker

[godwisper]

uhm mine had a yellow sticker and registered correctly on ps3key site and works only with upd files and not hex

[k3rizz3k]

Yellow sticker = avrkey NOT PS3Key. PS3Key has a GREEN sticker

No, mine is a yellow sticker, and is a ps3key. works with the updates, green is the avr key, which only works with "open" firmwares.

[ocdetective]

Yeah I got that totally the wrong way round! Apologies.

[tsb]

problem should be fixed now

[Blaze]

yes it is, i received a mail from them telling me that the problem was sold and then saw the "Invalid serial numbers -- our bad!" in ther site.

Ty