PSGroove Ported to Rockbox for Sansa e200 series and others

**sleepwalk** · 10-04-2010,03:09 PM

Sorry 4 the delay DanyL but been at werk all day.

Here's what I got when I tried to install the driver :-

Windows 7 (x64)

If I just install the rockbox folder itz ok

Think itz summart to do with windows 7 (x64) needing digital signing on itz drivers.
works fine on laptop (windows xp x86)

Keep up the gud Werk

**vico07** · 10-04-2010,04:47 PM

hi.
I am trying to compile .rockbox for samsung yh-920.

I am instal cygwin
(http://www.rockbox.org/wiki/CygwinIn...ithScreenShots)

I download Multi-Device patch where is port for Samsung yh-920.i put it to folder .rockbox .Now i start cygwin and type patch --binary -p0 <Multi-Device.patch and press enter. Now i see this

SaVi@Milassek /cygdrive/c/users/SaVi/desktop/rockbox/.rockbox
$ patch --binary -p0 <Multi-Device.patch
can't find file to patch at input line 5
Perhaps you used the wrong -p or --strip option?
The text leading up to this was:
--------------------------
|Index: firmware/export/config.h
|================================================= ==================
|--- firmware/export/config.h (revision 28160)
|+++ firmware/export/config.h (working copy)
--------------------------
File to patch:
Skip this patch? [y]
Skipping patch.
2 out of 2 hunks ignored
can't find file to patch at input line 33
Perhaps you used the wrong -p or --strip option?
The text leading up to this was:
--------------------------
|Index: firmware/export/config/sansac200.h
|================================================= ==================
|--- firmware/export/config/sansac200.h (revision 28160)
|+++ firmware/export/config/sansac200.h (working copy)
--------------------------
File to patch:
Skip this patch? [y]
Skipping patch.
1 out of 1 hunk ignored
can't find file to patch at input line 46
Perhaps you used the wrong -p or --strip option?
The text leading up to this was:
--------------------------
|Index: firmware/export/config/gogearhdd1630.h
|....
.
.
.
.
.
.
.
|--- firmware/export/config/ipodmini2g.h (revision 28160)
|+++ firmware/export/config/ipodmini2g.h (working copy)
--------------------------
File to patch:
Skip this patch? [y]
Skipping patch.
1 out of 1 hunk ignored
can't find file to patch at input line 241
Perhaps you used the wrong -p or --strip option?
The text leading up to this was:
--------------------------
|Index: firmware/export/usb.h
|================================================= ==================
|--- firmware/export/usb.h (revision 28160)
|+++ firmware/export/usb.h (working copy)
--------------------------
File to patch:
Skip this patch? [y]
Skipping patch.
1 out of 1 hunk ignored
can't find file to patch at input line 253
Perhaps you used the wrong -p or --strip option?
The text leading up to this was:
--------------------------
|Index: firmware/usbstack/usb_core.c
|================================================= ==================
|--- firmware/usbstack/usb_core.c (revision 28160)
|+++ firmware/usbstack/usb_core.c (working copy)
--------------------------
File to patch:
Skip this patch? [y]
Skipping patch.
8 out of 8 hunks ignored
patching file firmware/usbstack/psgroove.c
patching file firmware/usbstack/psgroove.h
patching file firmware/usbstack/psgroove_descriptors.h
can't find file to patch at input line 1802
Perhaps you used the wrong -p or --strip option?
The text leading up to this was:
--------------------------
|Index: firmware/SOURCES
|================================================= ==================
|--- firmware/SOURCES (revision 28160)
|+++ firmware/SOURCES (working copy)
--------------------------
File to patch:
Skip this patch? [y]
Skipping patch.
1 out of 1 hunk ignored
can't find file to patch at input line 1814
Perhaps you used the wrong -p or --strip option?
The text leading up to this was:
--------------------------
|Index: firmware/target/arm/usb-drv-arc.c
|================================================= ==================
|--- firmware/target/arm/usb-drv-arc.c (revision 28160)
|+++ firmware/target/arm/usb-drv-arc.c (working copy)
--------------------------
File to patch:
Skip this patch? [y]
Skipping patch.
3 out of 3 hunks ignored
can't find file to patch at input line 1856
Perhaps you used the wrong -p or --strip option?
The text leading up to this was:
--------------------------
|Index: firmware/usb.c
|================================================= ==================
|--- firmware/usb.c (revision 28160)
|+++ firmware/usb.c (working copy)
--------------------------
File to patch:
Skip this patch? [y]
Skipping patch.
2 out of 2 hunks ignored

SaVi@Milassek /cygdrive/c/users/SaVi/desktop/rockbox/.rockbox
$

What iam doing bad?I dont see config sor samsung yh-920.
Sorry for long post.Is there somebody who can compiled or help me to make it?Sorry for my bad english.Iam czech.

**DanyL** · 10-04-2010,04:59 PM

Originally Posted by sleepwalk

Sorry 4 the delay DanyL but been at werk all day.

Here's what I got when I tried to install the driver :-

Windows 7 (x64)

If I just install the rockbox folder itz ok

Think itz summart to do with windows 7 (x64) needing digital signing on itz drivers.
works fine on laptop (windows xp x86)

Keep up the gud Werk

Well, It's not my program's foult :P

But you can run unsinged drivers on vista\7 by pressing F8 while windows booting and then choose to turn off the unsigned driver
check.

Anyway, Thanks.

Originally Posted by vico07

hi.
I am trying to compile .rockbox for samsung yh-920.

I am instal cygwin
(http://www.rockbox.org/wiki/CygwinIn...ithScreenShots)

I download Multi-Device patch where is port for Samsung yh-920.i put it to folder .rockbox .Now i start cygwin and type patch --binary -p0 <Multi-Device.patch and press enter. Now i see this

What iam doing bad?I dont see config sor samsung yh-920.
Sorry for long post.Is there somebody who can compiled or help me to make it?Sorry for my bad english.Iam czech.

Why are you skiping all the patching procces?

**Evostar** · 10-04-2010,05:02 PM

1. You need the source of rockbox, not the binary
2. Read this

**slicer2k** · 10-04-2010,09:18 PM

Other series like "m" are capable of working? I have a m240 with a broken display, so i'm like steve wonder when using it.

**BlackxLabel** · 10-04-2010,10:48 PM

Has PSFreedom been ported to Sansa Clip v1 yet? I have installed RockBox on it but I am not sure if there is any PSFreedom compatible with this device.

**eujin** · 10-05-2010,11:45 AM

Evostar, Hermes v3 is awaiting you! lol

**id10terror** · 10-05-2010,11:47 AM

I'll try and compile Hermes V3 today if I get a chance.. If not I'm sure Evostar will get it done

---------

Also, Hermes V2 for e200v1 and c200v1 by Evostar have been added to the first post (PSGroove Ported to Rockbox for Sansa e200 series and others).. Thanks again Evostar

**Evostar** · 10-05-2010,01:48 PM

I think ive got it done.

(this time at rapidshare, forums upload did not work for me

)

PSGroove_Hermes_V3_e200v1_Evostar.zip
PSGroove_Hermes_V3_c200v1_Evostar.zip

**sleepwalk** · 10-05-2010,02:12 PM

Originally Posted by Evostar

I think ive got it done.

(this time at rapidshare, forums upload did not work for me

)

PSGroove_Hermes_V3_e200v1_Evostar.zip
PSGroove_Hermes_V3_c200v1_Evostar.zip

Evostar your a star
Great werk mate

User Tag List

Thread: PSGroove Ported to Rockbox for Sansa e200 series and others

Tweet

LinkBack

Thread Tools

Display


	Would you like to get all the new info from PSX-Scene in your email each day? Subscribe to our Daily Digest! Want to learn more about the team keeping you up to date with the latest scene news? Read about them now! Check out our Developer bios, too!