PSGroove Ported to Rockbox for Sansa e200 series and others

[id10terror]

Much thanks to Shuffle2 for releasing his Rockbox port to the iPod.. without it this wouldn't have happened.

PSGroove Ported to Rockbox for iPods. - PSX PS2 PS3 Scene Hacking Modchip & Jailbreak Community (PSGroove Ported to Rockbox for iPods.)

----------------------------------------------------------------------------------------------------
Instructions:

1. Download Rockbox Installer -- Rockbox 3.6 Download
2. Use installer to install at least the minimal Rockbox installation

Once Rockbox is up and running normally on your Sansa e200\c200:

3. Extract the attached zip file into the root of your Sansa and let it overwrite any newer files.

4. Disconnect and restart your Sansa.

Once your Sansa is re-booted into the new Rockbox:

5. Turn off the back Power switch or Disconnect PS3.
6. Connect the Sansa via USB to your PS3. (make sure it's the only thing connected)
7. Turn the Power switch back.
8. Press the touch sensitive Power Button and then Eject immediately after.
----------------------------------------------------------------------------------------------------

*If attached files are downloading as corrupt use the Mediafire mirrors*
http://www.mediafire.com/id10terror


PSGroove1.3 w/ BM enabled by id10terror
+ Sansa e200v1 (PSGroove-Sansae200-BM.zip) (Mirror)
+ Sansa c200v1 (PSGroove-c200v1-BM.zip) (Mirror)
+ Tested and working on Sansa e200R (Rhapsody version) -- Instructions HERE (PSGroove Ported to Rockbox for Sansa e200 series and others)

Hermes payload and BM2 support by Evostar
+ Sansa e200v1 (PSGroove_e200v1_hermes-Evostar.zip) (Mirror)
+ Sansa c200v1 (PSGroove_c200v1_hermes-Evostar.zip) (Mirror)

Hermes V3 payload by Evostar
+ Sansa e200v1 (PSGroove_Hermes_V3_e200v1_Evostar.zip) (Mirror)
+ Sansa c200v1 (PSGroove_Hermes_V3_c200v1_Evostar.zip) (Mirror)

Hermes V3 payload for FW 3.01 by CrashSerious
+ Sansa c200v1 (PSGroove Hermes V3 c200v1 FW 301 - CrashSerious.zip) (Mirror)
- Sansa e200v1 (untested) (PSGroove Ported to Rockbox for Sansa e200 series and others) (Mirror)

Hermes V3 payload for FW 3.15 by CrashSerious
+ Sansa c200v1 (PSGroove Hermes V3 c200v1 FW 315 - CrashSerious.zip) (Mirror)
- Sansa e200v1 (untested) (PSGroove Ported to Rockbox for Sansa e200 series and others) (Mirror)


Hermes V3 + Waninkoko (PKG) + Mathieulh fix by Evostar
+ Sansa e200v1 (PSG_Hermes_V3_PKG_Math_fix_e200v1_Evostar.zip) (Mirror)
+ Sansa c200v1 (PSG_Hermes_V3_PKG_Math_fix_c200v1_Evostar.zip) (Mirror)

PL3 payload for FW 3.15 by CrashSerious
+ Sansa c200v1 (PSGroove PL3 - C200v1- FW 315 - CrashSerious.zip) (Mirror)

Hermes V4b payload by Evostar
+ Sansa e200v1 (PSG_Hermes_V4b_e200v1_Evostar.zip) (Mirror)
+ Sansa c200v1 (PSG_Hermes_V4b_c200v1_Evostar.zip ) (Mirror)

*Unless otherwise noted, FW 3.41 is assumed*

Thanks to:
* Shuffle2 for releasing the original Rockbox Port.
* Evostar for compiling the Hermes v1,v2, and v3 versions. Evostar's rockbox_psgroove_pl3 at master - GitHub
* CrashSerious for compiling for firmwares 3.01 and 3.15.
* DanyL for his compiles for various devices and firmwares (SourceForge.net: User danyl3)


Notes:
* To return Sansa to normal, just run the Automatic installer and reinstall Rockbox.
* To access original firmware and USB functionality:
Turn on Sansa while holding down the left (or back) button.
Connect to your PC's USB.

id10terror.net
----------------------------------------------------------------------------------------------------

Rockbox Custom Bootloader v0.3 for e200\e200r\c200

Instructions are posted on my Blog:
id10t error » Blog Archive » Rockbox Custom Bootloader v0.3 Released!

Downloads:
CBLv0.3-id10terror.zip hosted by GitHub

CBLv0.3-id10terror.zip hosted by psx-scene


version 0.3
+ Support for Sansa e200r
+ User-configurable settings via cbl.cfg file


version 0.2
+ Added support for c200 series

version 0.1
+ e200 series custom bootloader

This information can also be found on my GitHub:
http://github.com/id10terror/RB-CBL

What does it do? What is it for?
This is a modification of the original Rockbox bootloader. It allows you to boot multiple firmwares
by pressing an assigned button while powering up your Sansa. The buttons can be customized
using the cbl.cfg file.

----------------------------------------------------------------------------------------------------


Disclaimer: I do not condone or endorse piracy in any form. This article and the posts contained within this thread are simply for informational\educational purposes only. I am not responsible for what you do with the information presented herein.

[$likness]

Can you assist with the Sansa c200 v1?

[sabbath]

Yeah, I have a Fuse, so hopefully coding from the e200 to the fuse is not that difficult.

[unidentified]

Sweet.

I guess this confirms that it is actually Rockbox that is helping to perform the JB rather than the iPL (iPod loader).

Guess this means could be ported to many other Rockbox profiles (e.g. iRiver / Archos / Cowon / Samsung etc.) ?

[id10terror]

Can you assist with the Sansa c200 v1?

Attached to the first post

[id10terror]

Yeah, I have a Fuse, so hopefully coding from the e200 to the fuse is not that difficult.

Compiling for Fuze v1 now.. I'll attach files to original post as I compile them..

[$likness]

works great so far thanks for the assistance

[jonkim2002]

hi, do you think this would work on the c200v2? thanks a lot.

[sabbath]

Helluva guy...wish i knew more about coding

[k3rizz3k]

Would it be hard to port for the ClipV1?