PSGroove Ported to Rockbox for iRiver 5gb H10

**ChaoticHampster** · 09-27-2010,09:59 PM

This is based on the work by Shuffle2 and all of the other crazy cats on these forums who've helped on the Rockbox code.

PSGroove for Rockbox on iRiver H10 5gB

To install:

1. Download the RockBox installer and install RockBox on your device.
2. Download the new .mi4 file from one of the current ps3 groove builds for the 5g H10.
3. Navigate to your H10
4. Replace the existing .rockbox folder with the new one you just downloaded. (or if you know what you're doing just replace the .mi4)
5. Boot h10 and see if RockBox is working properly.
6. Turn h10 off.
7. Isolate PS3 (switch for fat, unplug for slim)
8. Connect h10 to ps3 via usb
9. Power on h10.
10. Connect power back to PS3 (switch or physical connect)
11. Hit the on and eject buttons in quick succession.
12. Enjoy fiddling.

This thread currently contains builds up to Hermes v4.

For newer builds consult DanyL's page and shoot him some words of thanks:
http://sourceforge.net/userapps/wordpress/danyl3/

Note: This will only work on the iRiver h10 5gb, NOT on any of the other iRiver family devices including the 20gb version. It should be an easy patch if anyone is interested though...

NOTE: I do not condone or endorse piracy in any form. Buy games to support developers!!! To the best of my knowledge all code contained here in is open source and free of copyright restrictions. The information in this thread is for the greater understanding of others. I do not hold any liability for any damage/s occurred due to the contents of this thread.

**JamesRaimes** · 09-28-2010,06:02 AM

Tested it with my 6gb H10. It worked perfectly, backups worked, it's all good. Great job, thanks for sharing

**coolwulf** · 09-28-2010,11:05 AM

Is it possible for you to post a Iriver H10 20gb version? Or maybe point out how to compile it myself? Thank you in advance.

**ChaoticHampster** · 09-28-2010,11:02 PM

Unfortunantly I'm very busy with my thesis so I'll send you the directions.

I've pmed you coolwulf with directions.

If anyone else is planning on patching rockbox themselves I strongly recommend using a linux environment NOT cygwin etc.

It is much much faster.

Here is the linux guide for rockbox dev. http://www.rockbox.org/wiki/LinuxSimpleGuideToCompiling
And here is the patching guide. http://www.rockbox.org/wiki/SimpleGu...Adding_Patches

And the patches are here:
http://www.mediafire.com/?z55f5y5dbd25xt7

Credit to all those involved in making this happen. There are too many to count.

**stircrazie** · 09-28-2010,11:13 PM

now i hope someone gets the chance to compile a sansa e200v2 rockbox version.

**Soussi** · 09-30-2010,01:51 AM

How can i patch it for a iriver H320 ? Or has someone allready done it?
Would be awsome if someone could do this

And awsome work on the iriver guys!

**sic** · 10-04-2010,08:39 AM

Originally Posted by ChaoticHampster

This is based on the work by Shuffle2 and all of the other crazy cats on these forums who've helped on the Rockbox code.

PSGroove for Rockbox on iRiver H10 5gB

This is not the Hermes payload. If I have the time and any interest I might work on it but atm I'm a bit too busy with other things. But BM1 is tested and working.

Same as most of the other installs, just copy the .rockbox folder on top of the one already on your Rockboxed h10 5gb.

Note: This will only work on the iRiver h10 5gb, NOT on any of the other iRiver family devices including the 20gb version. It should be an easy patch if anyone is interested though...

cheers mate for the great work!! any chance you could compile a version with the hermes payload?? or point me in the right direction cheers

**dkeeper** · 10-09-2010,08:11 AM

Hi,
Thanks for the port on the H10.
Is there any way that you would port/give us instructions on how to port the newest payload for Rockbox on the Iriver H10?
Thanks in advance.

**ChaoticHampster** · 10-10-2010,11:36 PM

Hi all,

Unfortunantly due to my uni work I've been very busy and thus lent my h10 to a friend for his use and testing.

I've recompiled the code for the newest Hermes v3 payload but it remains untested and I have no idea if it works or not. It should but I must reiterate it is untested!!!

I've attached the files below and I'm sure you know what to do with them. Please respond if its working or not and maybe I can have a look at it and review my changes, but until 27th of October I'm a busy bee.

**dkeeper** · 10-11-2010,12:07 PM

Hi,
The updated version works like a charm

Thank you very much for your quick and working update.
Good luck with the uni.

User Tag List

Thread: PSGroove Ported to Rockbox for iRiver 5gb H10

Tweet

LinkBack

Thread Tools

Display


	Would you like to get all the new info from PSX-Scene in your email each day? Subscribe to our Daily Digest! Want to learn more about the team keeping you up to date with the latest scene news? Read about them now! Check out our Developer bios, too!