The above video goes away if you are a member and logged in, so log in now!
is it possible for a sb51xx
is it possible for a sb51xx –
is it realy possible to put groove on a motorola sb51xx
if so then how do we program it
i take it that you carnt do it from usb and you have to do it the same way we flash the firmware
You put the PSGroove code on something called "Blackcat".
It is a small device just like the Teensy v1.0 boards just was originally used by hackers to flash the SB5101 modems.
You erase the Blackcat crap from the device, and re-use it as a cheap "almost still in-stock" Teensy device.
You can't do anything with the modem itself.
like this ?
what about a max232?
max232 will convert those serial voltages to TTL.
this is not an atmega chip.