The above video goes away if you are a member and logged in, so log in now!
ok~~I see but,
Originally Posted by iLLNESS
My bootloader use "Microchip.BootLoader.USB.HID.v2.6b"
can you complie another for that ?? thanks~~
Originally Posted by poppy14
iLLNESS, thanks for the help yesterday, i found the problem (well couldn't test the hex yet, but i can upload the hex just fine now)
It's very weird, i used the picflash software to see if the hex wasn't starting at 0x800 and it was. So i just saved the hex with picflash and then i compared the 2 hex files to make sure the picflash didn't mess with the code.
As the 2 files had the same code, i used the second file and i could upload it to my board.
Weird isn't it?
Just posted it because u tryed to help me and maybe the info will be useful in the future.
Sory for my english.
Illness I do appreciate your efforts a lot, the way you are truly trying to help people here is commendable.
There is one thing I would like to know, on page one of this thread you have posted schematics, man I love those schematics.
Which software you use to make those schematics, the software I use are Altium 9 and EAGLE and the schematics drawn in them are as pretty as dennis rodman.
Would you be kind enough to let me know the name of the software that you use to draw schematics.
Originally Posted by ps3linux
just copied an led picture off the net and put it in. i didnt originally design the schematic, i used darkstartms schematic as a base and obviously its been heavily edited since then.
Thanks for the reply.
Nice way to do schematics.
Couple of years back a friend send me this demo version of a software (from some brit company) that used to draw schematics just like the ones you ve done on page one.
Unfortunately, i forgot the name and my son while exploring my notebook deleted that "un-necessary .exe file"
Oh, why there's no mathieulh's version of the payload with retail packages support hex but WITHOUT bootloader anywhere? My board can't be modified for bootloaders, so I flash it quite successfully with art2003, but I the thing I need is just without bootloader.
Well, I have another doubt (sorry)..
I have build my own board with 18F2550, the first release.. And did some changes as I saw people doing here.. But I still without using any bootloader, cause to do it, I have to buy some more components..
I have tried all HEX in this topic (all of 16MHz) but no one worked for me..
What should I do to get this working (version 1.6 or 1.7) with a board without BL, LED B1 and no LVP (well, I can just change and use LVP)?
seems the guy below me wants the same :P
Last edited by thomass; 10-14-2010 at 09:31 AM.
Did you check the files, whose links have been posted at my blog....
Originally Posted by thomass
Sorry, "illness" didn't mean to hijack your thread.