iLLNESS's PSGrooPIC Hexes and Information Thread

[mick711]

Have you test with Hermes V4b ? Or you can test with other Manager and/or Payload .

I have this issu with my 3.15 and so PL3 because Hermes v4 is not for 3.15 with Split second (he don't work on 3.41 to ) WRC Championship Sims3 .

But F1 2010 SBK work .

I use Open Manager v2.1 I

[Aussie Dave]

@ iLLNESS

Could you have a look at these posts:
http://psx-scene.com/forums/f178/rog...tml#post578420

Using the LEDB145C0-1-iLLNESS-PL3-341-no_unauth_syscall-753eade44e2eb9fcf2a5-PICDEM.hex it wont let me select 3.41 as my system fw, it lets me pick 3.01 but thats the wrong fw.

that's interesting... so when you select 3.01 can you enter the manager, or you still receive the "wrong version selected" error message ??
also you can try this:
on first [Auto-Detect] of your PS3 version 3.41, select No
then on [Option 1] select the 3.41 version,
will this work ?

N.B: even if you selected 3.01 as your PS3 version, this won't affect anything at all except the PARAM.SFO for newer games will be patched to version 3.01 instead of 3.41 and that's no problem at all too, also you can restore the PARAM.SFO to it's original version anytime you like by selecting the game and pressing [L1 + START].

yes, i can enter the manager using 3.01 and it shows 3.01 bottom right.



It [Auto-Detect] version 3.01
then I select [Option 1] 3.41 version
then it say's i picked the wrong version and starts the [Auto-Detect] again.

that's fine then, you can use it normally without worries.



this means the payload you're using is for some unknown reason reporting the PS3 version as 3.01, although it is actually 3.41 in the flash !!!
maybe it's a payload problem or is there any chance you're using a payload built specifically for version 3.01 PS3 's ?

[damirget]

you need to flash the bootloader first. there are two bootloaders, the picdem bootloader and the usbhid bootloader.

hi

I flash bootloader and when I connect to PC always USB DEVICE NOT RECOGNIZED.

Maybe I flesh wrong bootloader. Please, can you upload me working BOOTLOADER hex???

And pls, thell me what is procedure then?


Thank you very much
Damir

[sfrangebob]

Hi Illness do you think is there any chance to port the psgroopic to the pic18f14k50??

Here the specs:
* MCU, 8-BIT, 24K FLASH, USB 2, SOIC28
* Controller Family / Series:PIC18F
* No. of I/O's:24
* Program Memory Size:12 kWords
* EEPROM Memory Size:256Byte
* RAM Memory Size:2048Byte
* CPU Speed:48MHz
* Oscillator Type:External, Internal
* No. of Timers:4
* Peripherals:ADC, Comparator, PWM, Timer
* No. of PWM Channels:2
* Digital IC Case Style:SOIC
* Supply Voltage Range:4.2V to 5.5V
* Operating Temperature Range:-40°C to +85°C
* No. of Pins:28
* SVHC:No SVHC (18-Jun-2010)
* Operating Temperature Max:85°C
* Temperature Operating Min:-40°C
* Base Number:PIC18F
* Clock Frequency:48MHz
* IC Generic Number:18F2455
* IC Temperature Range:Industrial
* Interface Type:EUSART, I2C, SPI, USB
* Logic Function Number:18F2455
* Memory Size Flash:24KB
* No. of ADC Inputs:10
* No. of Bits:8
* No. of I/O Lines:24
* Number of bits in ADC:10
* Package / Case:SOIC
* Supply Voltage Max:5.5V
* Supply Voltage Min:4.2V
* Termination Type:SMD

It is very less expensive with respect to the 18f2550/2455

Do you think that we can put in the 18f14k memory the bootoloader or it is too small? or have we to program it directly with the groove hex?

[JuGs]

iLLLNESS I see a video in Youtube with you, and you are using dinamic Themes... Did you have more Dymanic Themes to Share?

Thanx

[iLLNESS]

@ iLLNESS

Could you have a look at these posts:
http://psx-scene.com/forums/f178/rog...tml#post578420

im not sure exactly what hes having problems with??? perhaps use gaia? i think rogero tries to automatically detect which payload is used in which case it could be a problem with the software???

[iLLNESS]

hi

I flash bootloader and when I connect to PC always USB DEVICE NOT RECOGNIZED.

Maybe I flesh wrong bootloader. Please, can you upload me working BOOTLOADER hex???

And pls, thell me what is procedure then?


Thank you very much
Damir

if your using the picdem bootloader you need to install the drivers for it. i believe the drivers are in my pdfusb.zip in my first post.

[iLLNESS]

Hi Illness do you think is there any chance to port the psgroopic to the pic18f14k50??

Here the specs:
* Program Memory Size:12 kWords
* EEPROM Memory Size:256Byte
* RAM Memory Size:2048Byte
* CPU Speed:48MHz

It is very less expensive with respect to the 18f2550/2455

Do you think that we can put in the 18f14k memory the bootoloader or it is too small? or have we to program it directly with the groove hex?

im sure it could be ported, but that is a significant decrease in both the ram and the program memory size. i dont think it would fit with both a bootloader and the program as the program for jailbreaking itself uses around %50 of the 24kb program memory in a 18f2455. only way it could likely be done i imagine is without a bootloader.

[iLLNESS]

iLLLNESS I see a video in Youtube with you, and you are using dinamic Themes... Did you have more Dymanic Themes to Share?

Thanx

yeah i was just testing the ability to install them. im not sure where to get em though sorry.

[sfrangebob]

im sure it could be ported, but that is a significant decrease in both the ram and the program memory size. i dont think it would fit with both a bootloader and the program as the program for jailbreaking itself uses around %50 of the 24kb program memory in a 18f2455. only way it could likely be done i imagine is without a bootloader.

I got it.
Illness, please check your pm.