The above video goes away if you are a member and logged in, so log in now!
For me this solution is much better. I have 2 LEDs ,and one is blinking during booting ,and second lights when everything goes ok.
Peviously booth lights ,when everything is ok.
Last edited by mig25; 11-06-2010 at 11:00 AM.
Yes I'm using picdem bootloader, the thing is I don't know wich hex to use in the list :s
Originally Posted by iLLNESS
i am having issues installing the custom bootloader onto my pic18f4550 from vgcrepairs.com. i installed the .NET framework stuff and the C+++ stuff already. everytime i try to install to the bootlader using Microchip BootLoader USB HID v2.6b it gets the point where the "verify started". as per the guide the verify started will hang at this point and i can just reset my device. when i go into device manger i still have no "generic deivce" under USB. but under HID i still have the same two HID devices pop up.
could you sell me which hex your using and what ports your LED's are on?
Originally Posted by sfrangebob
Originally Posted by Noltari
hey. grabbed your mhcpusb hex and checked it out.. even before i loaded it there was one thing i realised i forgot to mention.
the microchip PICDEM fs usb tool used to flash the device for mchpusb bootloader users needs to have some data added before each hex.
its easy to fix.
ive attached a bin file which contains the data which needs to be added infront of all other data.
@echo this fixes the hex file to work with mchb usb bootloaders.
@echo it adds the proper data infront of the compiled
@echo hex so programs like PICDEM Usb Flasher allocate
@echo the data to their proper address.
copy /b add_boot.bin+%1 /b %1-boot.hex
in plain text, this is it:
I have same issue , used LEDB145C0-1-iLLNESS-PL3-341-default_pl-753eade44e2eb9fcf2a5-PICDEM.hex from last pack. But for me this way works better !
Originally Posted by iLLNESS
mig25, yeah yours works normal. i accidentally turned off LEDs b145 and c0 for jailbreak success but had c1 turn on only. normally i turn on all those ports.
sorry guys to whoever is missing LED support.
mig25 yours works normally now by accident you should have two leds come on for jailbreak success as i think youve mentioned.
i may get around to fixing it but its not a big issue to me right now. might just wait till the next commit from PL3.
My key have LEDs: C1 Led is green , and C0 is orange , so only green lights when everything is ok. So this solution looks good. Previous ,when Two of them lights up also was ok ,but this looks much better ,when only green lights up...
BTW: In posts with hex packages at the end there was some history , but now isn't updated any more , pity that it's not continue any more.
yeah. well most those are all outdated now so i removed them. it just cluttered and was confusing to new users.
Originally Posted by mig25