iLLNESS's PSGrooPIC Hexes and Information Thread

[MeLLo]

..thanks mate, which picflash you mean. got a link?

thanks

Sory, u can download it here http://psx-scene.com/forums/514855-post2.html (PIC PSGrooPIC flashing/DIY guide, FAQ and hex files collections)

[Zerberus]

please make a "3.41_18Fxxxx-LEDB145C0-C1-BTLDR" hex with PL3 Payload

github.com/kakaroto/PL3

thx

[cmal1492]

yeah i was told the bootloader did not need to be modified in anyway and the code i had worked with the normal bootloader. this is likely the reason it wasnt working for me.

Really, what bootloader are you using? Is it the original one from the app library? The ucon method posted earlier for the switch may be the way you'd need to do it with that loader, but without seeing the source I have no way to know if it can be "tricked" without modification.

[TitaniumL]

Hello mate, I've tried PM'ing you and I'll just quote what I posted there.

I've just checked your thread and you seem very knowledgeable about this stuff. I've been searching for days trying to find out what my board type is. I've tried updating it with at90usb hexes and none worked. Apparently some dude in the amazebreak thread told me this

First of all i doubt this uses atmel chips, it identifies it self with
generic-usb 0003:AAAA:1111.0006: input,hidraw2: USB HID v1.00 Device [HID aaaa:1111] on usb-0000:00:06.0-4/input0

When in programming mode, so its 99% sure a PIC based unit with amazebreaks programming mode on it.
So that means we need amazebreak to release new firmwares to use

Here is a pic of it as well, taken by someone else who has it

Can you confirm if its a PIC? If it is, do you recommend me using the latest iLLNESS PSGrooPIC 1.0a?

Please reply mate. I've been trying stuff and feel like I've been wasting so much time on this, for several days

Please help guys. I've the slightest idea when it comes to this stuff

[mick711]

Hello iLLNESS's

Sorry i find the source but i don't know how compile for 3.15 .

It's possible to make it with Hermes v4 ?

Thanks

[iLLNESS]

Hello iLLNESS's

Sorry i find the source but i don't know how compile for 3.15 .

It's possible to make it with Hermes v4 ?

Thanks

for 3.15 you need the 1.6d source from psgroopic. i have not managed to get kakarotos latest PL3 working with psgroopic source yet. ive been busy working on my house fixing some stuff that ive neglected for too long since ps3 hack came out

tomorrow is another day.

[djhazardous]

Which version of Hermes does 1.0a use just out of interest?

[wickedpenguin]

HEX Request:

Hi, any chance of getting the latest HEX for my USB Dev board.

Im using a PIC18f2550, non-bootloader. See image for schematics.

I really appreciate it.

Thanks WP

[komandokanut]

Hi iLLNESS.

I've been trying to compile latest Hermes sources so i can port the payload to the PIC by myself, but haven't succeeded so far.

When i compile the port1_config_descriptor.S with the makefile.payload, the port1_config_descriptor.h i get is way too small (roughly 4 kb) which is of course not working when i replace the port1 config descriptor in the usb_desc.h of PSGrooPIC.

With past versions, i see the contents of my compiled port1_config_descriptor.h matches the beginning of the port1 config desciptor in the usb_desc.h code, but i have no clue were the rest of the port1 config desciptor in the usb_desc.h is coming from, so it sees i'm missing a lot of code there.

Can you explain how to get the proper port1 config descriptor to put into the PSGrooPIC's usb_desc.h ??

Thanks a lot!

[FMAranda]

Hi iLLNESS, i saw that you are busy and that the kakaroto's payload is not working well with psgroopic, so, i attach the new psgroove hermes, the V4. Here is the source, and maybe it works better than the kakaroto.

Thanks for everything that you are doing for us.

FMA