iLLNESS's PSGrooPIC Hexes and Information Thread

[iLLNESS]

Yes it compiled, tested once, doesn't work for my 3.15 console. I might have done some stupid thing.

His makefile is quite easy to use, just change the LEDR and LEDG in it; but the make file needs cygwin, might write a bat file to match with it

yeah i was originally using cygwin to try and compile but had problems. I just changed his source to reflect something im more comfortable with and now again compile using pcwhd. ill look into using a make file for my source if users want it (as well as a batch) but for now ill just release my source

[iLLNESS]

custom source released based off noltari code!

http://psx-scene.com/forums/546952-post5.html (iLLNESS's PSGrooPIC Hexes and Information Thread)

[godhex]

3 hexes compiled by myself are now live on the front page of my thread:
http://psx-scene.com/forums/546954-post6.html (iLLNESS's PSGrooPIC Hexes and Information Thread)

Thanks Noltari for the source!

hello i used the picdem but when i run the program it says that the bootloader starts 800 and this will clean it what to do ????

[khafa]

3 hexes compiled by myself are now live on the front page of my thread:
http://psx-scene.com/forums/546954-post6.html (iLLNESS's PSGrooPIC Hexes and Information Thread)

Thanks Noltari for the source!

Thanks for your great work but I cant get it flash to pic board.I am using PICDEM .Previous hexes flashed without problem but PSGradePIC gives failed to flash error.Anyone knows how to solve it?

Edit: I found this and ps3 in service mode

http://dl.dropbox.com/u/4708147/PSGr...61b17ffb81.zip

[sam23]

Thanks for your great work but I cant get it flash to pic board.I am using PICDEM .Previous hexes flashed without problem but PSGradePIC gives failed to flash error.Anyone knows how to solve it?

Edit: I found this and ps3 in service mode

http://dl.dropbox.com/u/4708147/PSGr...61b17ffb81.zip

To use illness's hex open it with notepad and add at the beginning the line

:020000040000FA

Anyway it doesn't work for me, it flashes OK but doesn't work on PS3. There is something wrong with notari sources. The other hex you linked works, but that one is stolen from PS3Break official update, I would prefer to use something opensource.

[Alexandro]

Thanks for your great work but I cant get it flash to pic board.I am using PICDEM .Previous hexes flashed without problem but PSGradePIC gives failed to flash error.Anyone knows how to solve it?

Edit: I found this and ps3 in service mode

http://dl.dropbox.com/u/4708147/PSGr...61b17ffb81.zip

khafa, could you please clarify this for us?
Did you managed to downgrade using the hex from the attached link?
Thanks

[iLLNESS]

whoops. sorry about the picdem issue

dono how i forgot to fix that haha

the picdem hex is now fixed.

[khafa]

Now its working.Thanks iLLNESS...

[releva]

Illness, I've tried your psgrade for picdem and its not booting into factory/service mode. I manage to flash the hex successfully using the file PSGradePIC-1.0-iLLNESS-LEDA-B145C0_LEDJ-C1-PICDEM.hex found inside the 34.6 kb rar. I pressed cancel when it says the bootloader settings are different from the hex and board. Afterwards I completely power the ps3 off, insert the dongle into the right most port, pressed power follow by eject. Xmb shows up and I manually turned the system off . I removed the dongle , power the ps3 on and it just shows me the normal xmb without the red factory mode icon. Can you check psgrade again? I tried another picdem hex from http://www.ps3news.com/forums/ps3-ha...es-115910.html and its working fine thou. I'm using MetalP schematics.

[Maximize]

Please help I have been out of this for awhile which illness do I want to use

I have a diygadget and dont give a damn about led's which of the 3 illness picgrades should I use?