Hex File Collection For Various Boards

[JonahUK]

OK. Please test this hex files and tell me if are working without problems.

I will try to change the LED order for the b version and i will tell you how its going.

EDIT: I change the 5 to 6 and the 6 to 5 and now first LED blinking green and second LED stays green.
I will revert it back to the previous function.
Is not a problem for me. I will leave it that way.

I will test these tomorrow as the wife is watching TV at the mo.
I'm pretty sure they will work though but will let you know.

Cheers and well done on creating your first hex!

[Yngwiedis]

I will test these tomorrow as the wife is watching TV at the mo.
I'm pretty sure they will work though but will let you know.

Cheers and well done on creating your first hex!

Thank you very very much for all your help and i am very sorry for all the trouble.

I am looking forward for your message to know if the files are working or not.

Thank you again mate

[CZroe]

For those who have udips. The LED's work on my two boards (1a & 1c2) so *should* work on any other revision(s)...
Cheers,
JonahUK.

How do I know what version UDIP board I have? I don't see it silk-screened on the PCB. It came with USB bootloader 1.0, has no jumpers, and has no version number silk-screened on the PCB. I see what looks like two short unshielded rework wires soldered across points on the PCB (not copper traces). One goes from a resistor to a pad around the crystal and one seems to come from under the crystal to the HWB button but touches the back of a white SMT component (Cap? I see two orange ones that I know are caps but there are four other resistors and I thought diodes always have obvious polarity markings, so I don't know what else it could be).

Anyway, I'm looking for a UDIP HEX with Hermes V3 Waninkoko payload that works on FW3.15. Does this exist yet? Thanks in advance!

Anyone know why the OP still sends all ATmega32U2 owners to the hex files that don't work for UDIP (Teensy 1.0)?

[Yngwiedis]

How do I know what version UDIP board I have? I don't see it silk-screened on the PCB. It came with USB bootloader 1.0, has no jumpers, and has no version number silk-screened on the PCB. I see what looks like two short unshielded rework wires soldered across points on the PCB (not copper traces). One goes from a resistor to a pad around the crystal and one seems to come from under the crystal to the HWB button but touches the back of a white SMT component (Cap? I see two orange ones that I know are caps but there are four other resistors and I thought diodes always have obvious polarity markings, so I don't know what else it could be).

Anyway, I'm looking for a UDIP HEX with Hermes V3 Waninkoko payload that works on FW3.15. Does this exist yet? Thanks in advance!

Anyone know why the OP still sends UDIP owners to the wrong hex files (Teensy 1.0)?

There is not a PSGroove version for 3.15 firmware.

If you take some pictures of your board maybe i can tell you what version it is.

[CZroe]

There is not a PSGroove version for 3.15 firmware.

If you take some pictures of your board maybe i can tell you what version it is.

Well, they definitely have Waninkoko's 3.01/3.10/3.15 payload for PSXGroove, so are you saying that it's for PIC devices only? I guess Waninkoko's Hermes V3 mod was for something else and I have to deal with whatever Waninkoko's payload supports.

Thanks.

So, anyway, am I just out of luck with a UDIP board and a 3.15 PS3 if I don't want to update to 3.41?

Oh, and a pic of my UDIP is attached. There is a 3rd rework wire I didn't mention before going from a point near the RST button to a point next to the "RST" silk-screened letters.

[JonahUK]

Well, they definitely have Waninkoko's 3.01/3.10/3.15 payload for PSXGroove, so are you saying that it's for PIC devices only? I guess Waninkoko's Hermes V3 mod was for something else and I have to deal with whatever Waninkoko's payload supports.

Thanks.

So, anyway, am I just out of luck with a UDIP board and a 3.15 PS3 if I don't want to update to 3.41?

Oh, and a pic of my UDIP is attached. There is a 3rd rework wire I didn't mention before going from a point near the RST button to a point next to the "RST" silk-screened letters.

Your picture doesn't look like a 1a or 1c2 so it is either 1b or 1c1.

As for 3.15 hex, I have no idea how to compile for it as the exploit entrypoint is different to 3.41.

All the files I have are 3.41, sorry.

Have you contacted udip on these boards or tried linnix.com?

[Yngwiedis]

Well, they definitely have Waninkoko's 3.01/3.10/3.15 payload for PSXGroove, so are you saying that it's for PIC devices only? I guess Waninkoko's Hermes V3 mod was for something else and I have to deal with whatever Waninkoko's payload supports.

Thanks.

So, anyway, am I just out of luck with a UDIP board and a 3.15 PS3 if I don't want to update to 3.41?

Oh, and a pic of my UDIP is attached. There is a 3rd rework wire I didn't mention before going from a point near the RST button to a point next to the "RST" silk-screened letters.

Like i said before i haven't see any PSGroove version for other firmware except 3.41.
I think only PSFreedom have released for other firmwares.

The board on the picture is the B version of udip.
I have the same

[CZroe]

Like i said before i haven't see any PSGroove version for other firmware except 3.41.
I think only PSFreedom have released for other firmwares.

The board on the picture is the B version of udip.
I have the same

PSGrooPIC is based on PSGroove, is it not?

Well, they said this here:

"Everyone has his own advantages and disadvantages. Today Hermes released is Hermes Payload V3 and of course, in my point of view, it is the best one but… It is not compatible with 3.01, 3.10, 3.15 firmwares, only 3.41 is the lucky one.

In other hand, we have Waninkoko Payload, it compatible with 3.01, 3.10, 3.15, 3.41 firmwares but it hasn´t Hermes Payload advantages."

Am I confused about something very basic? We CAN load that payload, correct?

[CZroe]

Your picture doesn't look like a 1a or 1c2 so it is either 1b or 1c1.

As for 3.15 hex, I have no idea how to compile for it as the exploit entrypoint is different to 3.41.

All the files I have are 3.41, sorry.

Have you contacted udip on these boards or tried linnix.com?

No, I have not. I thought I'd try here first. I will ask. Thanks!

[Yngwiedis]

No, I have not. I thought I'd try here first. I will ask. Thanks!

No need to ask anything.
Your board is a 1b udip version.
Period.