Hex File Collection For Various Boards

[Chicharito]

These were posted on IRC, both "standard" and Hermes No-BRD versions.

The Hermes version DOESNT work with backup manager v1 (ie. with a disc inserted). I havent tried v2. The hermes teensy 1.0 file in the first post of this thread DOES work with backup manager v1 (with disc)

[xoncegame]

plz attach bootloader for this schematic
i program 4550 with art2003 with bootloader hex , now i want to update 4550 with 1.5 groopic for that schematic. for 8 and 20 mhz crystal, i will use (Microchip.BootLoader.USB.HID.v2.6b(the software for USBHIDC18 BTL) to update,
tnx alot.

[ordimans]

can you add the hex for atmega32u2 hermes.hex?

thanks

Hello

Did you find for Atmega32u2 ?


PS3 Key have atmega32u2 no ?


I have a PSJB model

But with FLIP from Atmel, i can write to USB key. I receive the following message :

(blank check fail at 0x0000)


somebody can help me ?

I don't know if it's the key or it's the wrong hex

[beerglass007]

What hex file does the minimus AVR ATMEL AT90USB162 need please ?

Thanks

[Podger]

What hex file does the minimus AVR ATMEL AT90USB162 need please ?

Thanks

I would normally say Google it... but the answer is 5 posts before yours.

[giz2003]

Hi, I have installed Minimus_AVR_USB_Pack (version 1.1 and 1.5) with backup manager v1 first with version 1.1 and then bm v2 with 1.5 and when I goto to backup manager utility to try and backup my copy of kil zone 2 it does not show the options to backup the game i.e. press x or o.

What am I doing wrong.

I have also tried flashing teensy 1.0 hex file with bm v1 and still the same issue not options to create backup.

any ideas? and suggestions would be great.

Aslo what does it mean when the green and red led are on when plugged into the ps3. IT happened once but not anymore, just curious.

Thanks

[kodacy]

PSGroove 1.1 + Boot Manager for PS3Break ATmel edition
successful flashed mine with attached file. Just hope they keep supporting this solution with a 16Mhz solution. anyone knows of any other clone that uses the exactly same configuration?

[jebise]

i posted this on a few other threads and want to get the word out. If you are having issues with games not booting it is most likely caused by the HEX file that was compiled in error and not the cause of BM2. If you get a blank screen then try putting a disk in the drive with BM2 or BM1. If that gives you a blank screen or you are freezing then it is the HEX you are using. The hermas payload is a lot harder to compile then the previous ones and most are done in error.

Here is one for the Maximus AVR file i uploaded which has working LED, this has booted every game i have tried for far without a disk.

[JayQue]

I cant seem to get the backups to display under app_home/PS3_GAME

I have the ATAVRXPLAIN

Tried Motorstorm pacific and NG2

using the proper hex and BMv2.0

-EDIT-

scratch that I got everything working now !

I was using psgroove_Hermes_Xplain.hex [33kb] before and NG2 wouldnt boot so I reflashed my xplain with this hex psgroove_ATAVRXPLAIN.hex [34kb] and now I can play Motorstorm 2 and Ninja Gaiden 2 with no problems.

[ordimans]

Hello,

I have a problem with FLIP Software, when i want to update psgroove.
I received a message: "blank check fail at 0x0000"
Please, if somebody can help me and give me a good answer.

i have this key:
http://www.ps3news.com/forums/attach...7&d=1285238616