Help FLIP stopped working

[atreyu187]

So I can not for the life of me get FLIP to work anymore. Not sure the problem but it gives me the same error on my AT90USB162.

Now I will admit that it has been a little while since I have had to use the program and can't find the exact means to flash this device but this is what I am doing step by step.

1- Insert USB stick and go into DFU mode by pressing the buttons
2- Start FLIP and select target device "AT90USB162"
3- Press CTRL+U ENTER
4 -CTRL+L to select hex ENTER
5- CTRL+P ENTER
6- Well here is number 6 my problem



What am I doing wrong as this is the same program I used before to program my PS3uKey and PS3Yes! Pro without any problems but now it detects them but this problem is killing me. It will not allow me to verify data on the dongle erase or anything but it sees the device just fine and detects it I am just stumped.

[dead5times]

I have been having the same problem with my Maximus stick and all of my home-made Teensy clones, all AT90USB162. I've been having to flash them with my SPI programmer.

[atreyu187]

Got it sorted I have to short a point out on the board and reflash my bootloader in order to get the chip working again. Pain in the arse but it is my personal favorite dongle.