Flashing Guide: Olimex AVR-USB-162+AVR-USB-STK - PSGroove

[khaosjimena]

Hello.

Just got my avr-usb-stk but i can't make it to DFU mode with anything.

I have tried everything but still nothing.

First try :

Hold RST, while holding RST i pressed HWB then i release RST and after HWB nothing.

After :
In the manual also says Hold HWB , while holding press RST then release RST.

But still nothing.

Maybe is the usb cable ? But i am using a to b usb cable from a printer so i think should be fine ?
Anyone has any idea ?

Thanks

I have the same problem. Any solution?

[BloodRose]

Awesome guide, thanks, worked like a charm.

[urbex]

Thanks for this, bought mine off micro controler shop.
Running fine, I had to boot windows into unsigned driver mode though.

[devilfury]

I don't know the difference between this and the other boards, but i wanna know if the future versions of PSGroove, will be ported for this Olimex Board, or there's the possiblity of being stucked with old versions.
I don't understand a thing, when i'm gonna flash, i'll be able to use the simple psgroove files (that you can use for every other board) or we gonna need someone who modify those files to work with the olimex??

sorry for my english

[BloodRose]

It's exactly the same chipset as the Teensy 1.0 (AVR162) so this one will be supported for a long while yet.

[xXx_Fess_xXx]

some one upload hermes hex file for it please

[Kalmain]

Someone has upload hex file for olimex (and other board) in the thread of the news. Here are the files.
I can't test it for now cause my board will drop at home by the end of the week so i don't know if it works well !

[devilfury]

Sorry for the silly question, on the Olimex's Manual you can read this:
BOARD USE REQUIREMENTS:
Cables: 1.8 meter USB A-B cable to connect to USB host.
Hardware: AVR-ISP500, AVR-ISP500-TINY or AVR-ISP500-ISO, AVRDRAGON,
ATICEJTAG MK2 or other compatible tools.
Software: WINAVR GNU C compiler and AVR-STUDIO.

Do I really need one of that Avr-isp500 and stuff? When the board arrives, i'll just have to follow the tutorial in the first page or there's something else i should know?

[Eternicide]

Hello, I have recently got my olimex AVR-162 board in the mail today did everything in this guide flashed ect. but when i do the power / eject, my ps3 turns on and won't even boot to the XMB. can someone help me? getting really frustrated XD

[mikeyprouser]

Hello, I have recently got my olimex AVR-162 board in the mail today did everything in this guide flashed ect. but when i do the power / eject, my ps3 turns on and won't even boot to the XMB. can someone help me? getting really frustrated XD

you must be on firmware 3.41

or have to do a hard reset ok

dont forget to put backup manager 1 on usb stick after ok