The above video goes away if you are a member and logged in, so log in now!
DIY Teensy Board Schematics
DIY Teensy Board Schematics –
With the release of PSGroove opensource PS JailBreak exploit for PS3, many are having trouble sourcing the required Teensy++, AT90USBKEY2 or AT90USB162 boards.
That said, today PS3JailBreak.com has shared schematics for the Teensy so that users can build their own if they wish.
As always, click on the picture below to enlarge it folks.
Finally, those who aren't into DIY solutions may also wish to look into either the AT90 USB thanks to Fuddster or the BlackcatUSB Flash Memory Programmer (from version 1.2 on) which uses the same microcontroller (AT90USB162) as confirmed by chesteruhi. More on that soon, including a video!
To quote: "The full schematics are available below (1.0 are on the top 2.0 are on the bottom)."
Read more: http://www.ps3news.com/PS3-Hacks/psg...#ixzz0yNdeMCOg
I price the parts to make one at about 5$ before shipping, and maybe an hour of soldering for the first one, much less after a few are done.
Last edited by xboxbman; 09-02-2010 at 10:57 AM.
Reason: forgot image
Beeing not familiar with microchips I have a question. Do i have to do something be able to use Tweedy software to flash it over USB or there must be some bootloader in it first? So is a programmer necessary ?
EDIT: Nevermind. Datasheet on Atmel site says that bootloader is already inside in every chip. You can flash it over USB with FLIP software from Atmel web site.
Answer to your question about model of the chip.
Lower is Teensy 1. I think it says AT90USB162 16MU.
Last edited by szlifier; 09-02-2010 at 03:15 PM.
where do we get the boards from mate?
Originally Posted by ashbuster
That is why this is not front page news.
Have fun trying to solder wires on to one of those BGA Atmel chips without having a professional PCBoard and an high-tech soldering machine.
You could of course order a few thousand of your own PCBoards from a factory, after designing an layout on a CAD program, and paying big money for artwork setup frees, etc.
It is not as simple as just buying a $3 chip, and few smaller pieces, and soldering it all together.
Besides the schematics are public information, they are right on Teensy's own website.
they are tiny looking closly at it
how the hell could someone do it ?
is it even posible to be able to solder something so small
It doesnt have to be SMD. You can get normal sized resistors and capacitors. Only AT90USB is a problem, there is 16MU(on the picture) and a little bigger version 16AU. All dimensions are in datasheets on Atmel site. Size if legs of 16AU is comparable to bios soldering points for modchip in PS2 V12 and up. It's possible.
Wrong. It's smaller than I thought. Don't try this at home.
Last edited by szlifier; 09-02-2010 at 08:10 PM.
Ye of little faith. I've no doubt of my ability to put these together. I'll post some pics next week when they come in and I get it assembled. They won't be the prettiest, but they will be solid, and will work, and that's all me and my friends care about.
Originally Posted by garyopa
will be looking forward to seeing that mate,
looks so tiny i just dont get how you would solder the chip
Its not impossibel, just very hard
And it exists sockets for the IC's, thats makes it a litlebit easier
I am planing to make my own striped version of the Teensy 1.0,
on a Prototyping Board.
UPS tracker says my microcontrollers are finally in the province, should be arriving today. I'll have my first one put together Tuesday-Wednesday I reckon, and pictures posted here soon after.
Originally Posted by ashbuster