Blackcat USB flash problem

[Sacohen]

I got a bit further (I Guess).
Now the BlackCat software says...
Blackcat USB Status: Connected
Device Mode: Enhanced JTAG
Board firmware version: 6.01
Connected to device: Error connecting to target board.

Still no connection with AmtelFlip 3.4.2

Any help is appreciated.

[Sacohen]

I'm not sure I'm using the correct drivers.

What frivers should I be using for a Windows Vista system?

I also have the availability of using Windows XP (a completly different machine)

I tried the Blackcat drivers and Blackcat software on that system and got the same thing.

With Blackcat Build 250 it said...

Blackcat USB Status: Connected
Device Mode: Enhanced JTAG
Board firmware version: 6.01
Connected to device: Error connecting to target board.

With the Blackcat Build 247 it said...

Blackcat USB Status: Connected
Device Mode: Enhanced JTAG
Board firmware version: 6.01
Connected to device: No Power. Chek power.

The Blackcat had power both the read and blue light were on.

Amtel Flip still would not detech it at all.

[Senaxx]

I also got a Blackcat USB but can't get it to flash. I've tried several PC's Windows 7 pc's and XP but nothing works.

Its a v1.7, and when I put the chip in dfu mode (both switches down (opposite direction from the usb port)) and I connect it and start the the flash application, it always says it cannot open USB. Blue and Red light are on when i put it in DFU Mode.

[Senaxx]

Still got the same problem sacohen

[Sacohen]

Still got the same problem sacohen

I finally got it working.
I tried various driver and finally found one that worked, but I can't remember which it is.
If it helps, here is a link to a screen shot of what my device manager screen looks like with the correct drivers.

http://i282.photobucket.com/albums/k...65/drivers.jpg