The above video goes away if you are a member and logged in, so log in now!
Atmel AT90USB162 Ps3 !
Atmel AT90USB162 Ps3 ! –
so i got my board 2 days ago and now i been trying to flash it i get the software for it and i have tryed loading it on the ps3 and nothing work my ps3 does not even give me the unkown usb device error any one know what psgroove i need for a at90usb162 here is the picture of my board
I think you can use the teensy 1.0 hex. Also, I have a blackcat USB which uses the same at90usb162 so the blackcat hex might work
i have tryed a whole bunch and my ps3 wont read it still
Could anyone help me find the correct hex file for this chip
What's your PS3 Firmware version?
i downloaded it and it and that does not even seem to be a hex file i tryed opening it with flip and it does not open i have ps3 fw 3.41 i had the jb on cause i installed it from my htc and then i ended up buying the board
This is almost certainly ps2chiper's board. It uses a 8MHz crystal hence not compatible with the usual teensy as they run on 16MHz. The hex in his thread will run fine according to the people who have tested.
Try this one - got the same board.
Edit: The LEDS don't work, looking into it.
i got it to work i downloaded this one and it seems to work perfectly fine i will try that file that u uploaded to see if it would work to