AT90USBKEY Flashing Guide

[visualise-this]

Can this be used for this? http://www.avrusb.com

[RRoD420]

Can this be used for this? http://www.avrusb.com

+1 mine will be delivered on Thurs, can we use this tutorial for the MAX AVR USB? specs say:

"The Max AVR USB board is a low-cost demonstration board based on the AT90USB 16kb microcontroller."

::EDIT::

Looks like it has "AVR-USB-162" and it looks like this tutorial will work (correct me if i'm wrong). Also, psgroove needs to be patched to run backup manager? Do these hex files this tutorial is pointing to have that patch? Also, the hex file attached here is good for all boards listed above is it the same as "PSGROOVE-PATCHED-ATAVRXPLAIN.hex". Thanks

[CG20]

Managed to flash my AT901287 USB Dev Board correctly (I think), but I am having problems using the Backup Manager.

Whenever I attempt to backup my own ORIGINAL game to my internal Hard Drive after the backup has been completed and I press load on the backup manager software the PS3 menu doesn't display the game itself, only the game in the disc drive.

Help would be greatly appreciated.

[RRoD420]

Managed to flash my AT901287 USB Dev Board correctly (I think), but I am having problems using the Backup Manager.

Whenever I attempt to backup my own ORIGINAL game to my internal Hard Drive after the backup has been completed and I press load on the backup manager software the PS3 menu doesn't display the game itself, only the game in the disc drive.

Help would be greatly appreciated.

Is it a patched backup manager we need? or patched hex file? to use backup manager properly? I think psgroove open source project was released with backup manager disabled.

[CG20]

Thanks for your help, appreciate your hard work in putting this tutorial out there for us noobs

[tally3tally]

i will be grateful if anyone can confirm if this board here works

hxxp://cgi.ebay.co.uk/DEVELOPMENT-BOARD-TEENSY-AT90USBKEY-AT90PLUS-3-0SE-/280560858279?pt=Apparecchiature_professionali_elet troniche&hash=item4152baf4a7

this video i guess represents the same stuff

youtube.com/watch?v=hTqLxD9K_Ko

ill be grateful of an early reply

[Emulatong]

works on that device as well
http://www.modtraders.co.uk/minimus-...ent-board.html

right?

[darkmater_101]

Thanks, this guide really helped.

It wouldn't connect via USB to start with, turns out I have a AT90USB162 once I selected the correct device from the list everything worked well.

If anyone can't get there USB to attach, make sure to try all the devices starting with AT90USB, it worked for me.

[marduk]

hi
i make my board with this schematic:
http://media.photobucket.com/image/p...chematic_r.png

windows can verify it and driver is installed anf flip program recognized it.
i can erase it
and blank chek is ok.
but
when i want program it hang on in 0% or 4%
whats wrong ??
whats problem???

[kartalxyz]

Hi everyone ! I want to update my chip but I don't know its brand and model. how can I learn ? help plz.