at90usb162

**tray** · 12-26-2010,07:43 PM

Hello, got a problem to reflash my AT90USB162 board, since i flashed with the wrong .hex. (now PC can't recognize the board, so can't access to usb open mode in Flip software like the first time)
As i can see and understand ), DFU means that you can reflash (replace) the board with new .hex?
if so, got a problem, dont really know how to do in my board. Where in the board do i need to do the "bridge"?

**szlifier** · 12-26-2010,08:20 PM

You need to take a picture of your board, good picture.

**tray** · 12-26-2010,08:25 PM

[lang=es]it is this one
[GUÍA] Programar clon PSJ AT90USB162 [HERMES/PL3/DOWNGRADE] (1 de 21) @ ElOtroLado.net PlayStation 3 Modchips y Softmods[/lang]

**budhaboy** · 12-29-2010,11:21 AM

I have the same problem with my PS3YES clone from R4 King. I have attached a picture of the board. What pins do I short to get the dongle back into DFU mode? I have contacted R4 King about a soultion but have not received a response yet. Thank you.

**dead5times** · 12-30-2010,11:34 AM

Pins 13 and 24 have to be grounded momentarily once the stick is plugged in.

**budhaboy** · 12-30-2010,01:11 PM

Dead5times you are the man. Thanks for the help!

User Tag List

Thread: at90usb162

Tweet

LinkBack

Thread Tools

Display


	Would you like to get all the new info from PSX-Scene in your email each day? Subscribe to our Daily Digest! Want to learn more about the team keeping you up to date with the latest scene news? Read about them now! Check out our Developer bios, too!