Printable View
Hello, got a problem to reflash my AT90USB162 board, since i flashed with the wrong .hex. (now PC can't recognize the board, so can't access to usb open mode in Flip software like the first time)
As i can see and understand ), DFU means that you can reflash (replace) the board with new .hex?
if so, got a problem, dont really know how to do in my board. Where in the board do i need to do the "bridge"?
You need to take a picture of your board, good picture.
[lang=es]it is this one
[GUÍA] Programar clon PSJ AT90USB162 [HERMES/PL3/DOWNGRADE] (1 de 21) @ ElOtroLado.net PlayStation 3 Modchips y Softmods[/lang]
I have the same problem with my PS3YES clone from R4 King. I have attached a picture of the board. What pins do I short to get the dongle back into DFU mode? I have contacted R4 King about a soultion but have not received a response yet. Thank you.
Pins 13 and 24 have to be grounded momentarily once the stick is plugged in.
http://img155.imageshack.us/img155/720/ps3yes20pic.jpg
Dead5times you are the man. Thanks for the help!:D