The above video goes away if you are a member and logged in, so log in now!
Ylod while installing Kmeaw over Rogero. HELP !
Ylod while installing Kmeaw over Rogero. HELP ! –
I was installing kmeaw CFW over Rogero CFW and while installing the PS3 turned off and showed YLOD then blinking red light. I tried heating motherboard in the oven and then putting thermal paste and the PS still shows YLOD. Please help.
Were you on Rogero 3.55 or 4.xx?
Give to the nearest service or sell it since I don't see a solution by soft.
If your NAND was screwed up by the mid-update YLOD, you'd get the RLOD, usually accompanied by a message on your TV like with the Xbox 360 and some RRODs.... I mean YLOD could be damn-near anything, but if you got it while the console was on, I HIGHLY doubt it was because of the classic problem with the solder cracking and losing connection to the motherboard under the RSX graphics processing unit... That would happen after turning the PS3 off. So if I had to guess, I would say it's not something on the motherboard, perhaps the power supply (PSU), that's usually the next most-common cause of the YLOD. Try a new PSU, I think you can use the black plastic ones over the original REALLY HOT metal ones of the original CECHAs, I don't know which PS3 you have.
Actually come to think of it, I don't know what else it would be, definitely try another PSU if you can, eBay should have a bunch up for < $50.
EDIT: Especially since your reflow didn't fix it, can't be the solder cracking problem...