The above video goes away if you are a member and logged in, so log in now!
Slim Blu Ray Board Replacement (Alternative Solder Points)
Slim Blu Ray Board Replacement (Alternative Solder Points) –
Hi im trying to replace my slim blu ray drive motherboard as son thought it would be fun to stick coins in the drive slot. Blew what i assume to be a fuse on the board. I ordered a replacement and started to remove the 8 pin chip from the new board and lifted two solder pads. Im trying to find out if there are any alternative points i can solder to as where the lines run to on the big chip i guess id call it are very tiny and i dont want to bridge them. Its a BMD-061 board btw
Follow the traces back from the pads you lifted. If you are handy with a soldering iron you can re-build the traces/pads.
the pins are way too close for myself to do, which is why i wanted alternative points (if they exist)
Well then follow the traces back from the lifted pads and see where they lead to, wherever they terminate can be used as an alternative point....