The above video goes away if you are a member and logged in, so log in now!
RSOD caused by 4.00 Rebug Spoofer
RSOD caused by 4.00 Rebug Spoofer –
I have a fat PS3 with the 3.55 Rogero CFW and I had the 4.00 Spoofer, I wanted to change of spoofer so I deactivated him and guess what? It fu*ked my PS3 and now I am getting despaired because the RSOD is not only in the normal boot but in the Recovery mode too. So I don't know what to do Can you please tell me a solution?
BTW, i Downgraded the PS3 with the E3 Flasher but I don't have it atm.
First off this reply assumes the downgrade was recent after they fixed the inabillity to use other 3.55 PUPs.
and secondly thats most likely a semi brick.
If you are still on 3.55 then just reinstall the 3.55 PUP you are running through the recovery menu. do not try to use a different 3.55 PUP as it may make matters worse.
Sorry re read the post.
Have you tried the RSOD fix LVL2DIAG.self file and kick your PS3 into FSM? this will require a device that can work as a service mode jig. PSP can work but I've never been able to get my PSP to actually work for it. I think it's one of my plugins....
Mike, I can't go to Recovery mode. I get the red screen there too.
No I haven't, I will try that method. But I wanna now how I do it. I put the PS3 in FSM and put the flash drive with the .self and or do what?
put the system into FSM it will power down. leave it like that while you put the RSODfixLVL2DIAG.SELF file on the root of your flash drive and rename it to LV2DIAG.self put the thumb drive into the right most port and turn on the console. If successful you should reboot to retail XMB.
Please verify that these file names are correct as It has been awhile since I used this tool.
I used my TI84, Turn on PS3 and pressed eject button, PS3 went down and I removed the TI84, putted the fat32 flash drive with the file in the right USB ( my right) and turned PS3 back on and it beeped and nothing, Red Screen again (
UPDATE: I can enter Recovery menu I wasn't doing it right.
So what do I do now? I had the Rogero CFW, the CFW that was downgraded WITH E3 FLASHER. What now?
Just reinstall the ROGERO CFW PUP. that should restore the damaged file in flash and recover your system.
Option six is the one you want. make sure the file is on the drive as it would need to be for CFW install. and follow the on screen instructions. Hope you recover!