Remarry ps3 blu ray with "devusb" files question
Those of you that have done it, did you copy the CFG folder to the usb drive or the "standalone" file thats in the folder. Im confussed as to which I should do.
My issues is I believe my logic board is completely fried. I have tried two known good blu rays and swaped the ribbon cable from the motherboard to the logic board and I still get the same issue, the blu ray wont except any disc. The blue light will light up when a disc touches the drive but it will not suck it in. I placed the drive in "locked" position and placed a blu ray on top of the drive with the magnet in place to "top load it and got no spin either. So im only left with two options the logic board or the motherboard. So I was going to try and replace the logic board and remarry it, I just wanted to make sure I understand how completely before I attempt. Lastly before I attempt im going to hook the "new" logic board up to see if I can get the disc to accept.
**Edit** im in ofw 3.41 do I need to do anything special to down grade to 2.30 besides install the 2.30 pup file?