The above video goes away if you are a member and logged in, so log in now!
Remarry BD without dongle?
Remarry BD without dongle? –
Hi all, I have a PS3 CECHA01 that was on my closet for quite a long time since the BD logic board dont work and i swap it from another PS3. I read that theres a remarry process but all says need a dongle, other sites says just need to run the FSM tool as a pkg. My question is can I use 2 simple USB with the files to repair it? One with the remarry files and other to run the lv2 files to get into FSM? Thanks in advance.
Well, this is what I did. First, the ps3 must have its original bd drive attached. Then, run this pkg on 3.55 cfw http://ps3.scenebeta.com/noticia/fac...vice-mode-tool which will put your ps3 in factory service mode without a dongle. Once you runned it, turn on your console and check that a big red rectangle appears saying "factory service mode" on the xmb. Now you can open up your ps3, change the bd drive and use a normal usb to run the remarry process. Finally after the remarry process is done, put any blueray movie to restore some files before you exit factory service mode.
The thing is to run the pkg I need a working BD board and thats what I dont have, I only have the unmarried one. If I try to run anything is just stay in a black screen.
I´m afraid you are out of luck then. Not really sure if you can still get into FSM with a dongle.
Thanks, Im waiting for the new lens to arrive and will try something I read from another post.
Ok so after all the BD dont take in disc and now im in a 8002F14E error at 60%