have anyone an idea how to connect a ps3 to a macbook using ethernet?
need that to copy games from my notebook to internal ps3 hdd =)
|
|
|
|
Would you like to get all the new info from
PSX-Scene in your email each day?
Want to learn more about the team keeping you up to date with the latest scene news?
Read about them now! Check out our Developer bios, too! | ||
|
|
have anyone an idea how to connect a ps3 to a macbook using ethernet?
need that to copy games from my notebook to internal ps3 hdd =)
this is copy and paste from a different site for windows but the idea of the process is the same
FTP Setup Guide
Something i had some hassle myself setting up, thought I'd share it out to all the newbies.
Information
This guide will show you how to set up your PS3 to FTP directly with your pc via a LAN cable with no router inbetween and not allowing it to access the internet at the same time so Sony can't communicate with your PS3. A Crossover cable is not required, just a standard Cat5 or Cat6 Ethernet cable is needed.
Equipment
- PS3 [3.15/3.41/3.55 - jail-broken]
- FTP App [BlackBox FTP 1.2 recommended]
- Computer with Ethernet LAN Port
- FTP Client [FlashFXP, Filezilla]
- Ethernet Cable
Step 1 - Computer Setup
Windows 7
Go to "Control Panel" and under "Network and Internet" click "View network status and tasks" To open "Network and Sharing Center". On the left side panel click "Change adapter settings". Identify which device is the LAN port you will be using, right click on it and select "properties". Click on the item "Internet Protocol Version 4 (TCP/IPv4)" then click the button "Properties". Click "Use the following IP address:" and "Use the following DNS server addresses:"
Windows XP
Go to the start menu and hover over "Connect to". Select "Show all connections". Identify which device is the LAN port you will be using, right click on it and select "properties". Click on the item "Internet Protocol Version 4 (TCP/IPv4)" then click the button "Properties". Click "Use the following IP address:" and "Use the following DNS server addresses:"
Fill out the box so it appears as below:
Click use the following ip address:
ip address= 10.1.1.1
Subnet mask = 255.255.255.0
Default gateway = 10.1.1.1
Click Use the following DNS server address:
Preferred DNS server = 10.1.1.0
Alternate DNS server = 10.1.1.10
Step 2 - PS3 Setup
Go to the settings tab on the XMB, then select "Network Settings" followed by "Internet Connection Settings". Push ok on the prompt and select "Custom", "Wired Connection", "Auto-Detect" then "Manual". Fill out the form as follows.
IP Address 10.1.1.2
Subnet Mask 255.255.255.0
Defualt Router 10.1.1.0
Primary DNS 10.1.1.0
Secondary DNS 10.1.1.10
Select "Automatic", "Do Not Use" and "enable". Push X to save the settings. Test connection to verify you can acquire an IP Address. Internet Connection should fail.
Open your FTP Sever on your PS3. I prefer BlackB0x FTP 1.2, but you can use MultiMAN or other types if you wish. It should tell you your IP Address is 10.1.1.2.
Step 3 - FTP
Open your FTP client and type in your PS3 IP (10.1.1.2) and make sure its on Port 21. IF you used a FTP server other than BlackB0x FTP 1.2, check if it needs credentials to work. Connect and begin transferring. Speeds should be very high as your connected directly to your PS3.
do i need a internet connection if you,re using PC-PS3 directly??
my problem is my modem has only one port and my pc has also have one port
that's the problem
| « Previous Thread | Next Thread » |