The above video goes away if you are a member and logged in, so log in now!
Error 10001111 with E3 Flasher
Error 10001111 with E3 Flasher –
Hi... Well, Today I was changing My CFW in my PS3 with E3 Flasher with DualBoot, And Later of a lot of Errors, I could install the CFW 4,31 Rogero V2.03 but when I go to Copy the CFW from the PS3 NOR to the E3 Flasher NOR (with the Switch in 010100, 0 is Down, and 1 is Up), I get the Error 10001111 (Failed to write PS3 BIOS... Check pads / clip at PS3 board check may not be properly seated).
And That it's impossible, because I did the Downgrade Step (The Dump of my NOR with the e3_downgrade.bin in the Micro SD, and the Switch 00001) and I didn't have problem with the E3 Flasher (although I Had a problem with the HDD, When I switch to CFW, I get a Black Screen, I Solved that disconnecting the HDD) but nothing with the E3 Flasher (The Log File is 100% OK), and that Step I need to Read and Write the PS3 NOR.
I don't believe the Clip was released of the NOR, because I made the Downgrade Step without Errors, and when I install the Clip, I put it continuous pressure.
But, when I soldered the Points to DualBoot in the first Install, a point is dropped from the MotherBoard, But Finally I can let firmly, Or that I believed. I guess, the point is NOR_TRISTATE... But, If the point is dropped again... That is the problem?, It's Posssible?
I wish can you Help me... And I wish to fix it without disassemble my PS3... is a lot of pressure for me...
NOTE: My PS3 is a SLIM CECH-2011B and With SPANSION NOR. In the CFW, I have a HDD with 232 GB. I'm using the ESATA STATION of E3 Team
EDIT: Now the E3 Flasher Works, I don't know How, but I have 4 of 8 LED on... Maybe the PS3 was Hot yesterday (because I have working in that 10 hours without Stop) And today, The PS3 is Cold and Working. My PS3 have a lot of surprises for me.
Last edited by juanpiseba; 12-07-2012 at 10:50 AM.