BR Controller/MOBO and Bricked, Story to tell, possible solution, need advice
Ok this is a semi long story, but i need answers from people who know for sure, so please help.
Console A 40 gig fat - Got in an updating loop cause of no BR Drive, turned it off, now there is no menu, just a black screen, turns on for about 15-25 secs then turns off. I can get into the recovery menu, tried everything, most errors to do with not being able to access the hard disk, even tried updating firmwear. Says need 3.15 or higher, tried both, just continues with the HDD serious error code.
Console B 60gig fat - completely unrepairable, thought id take the BR drive out and put it into console A to solve the looping issue ifi can ever get it out of possible bricked status. Found out the controller card needs to be married to the MoBo. SO that plan got shot
My question... I realise the controller cards are married to the mobo they came with. So my solution idea, please advise. If i put the Blue ray and card from console B into console A and if i also remove the 48 pin and if needed the 8 pin? flash chips from console B's mobo and put them onto the Mobo of console A, will this make the Blu ray drive compatible and married and also seeing as the 48 pin hasfirmwear for the 60gig on it will this also bypass my bricked problem with console A as it will be getting console B's firmwear flash chip etc.
Anyways, hope to hear it will work, but please let me know.