Flashing Liteon DG-16D2S without probe..

[billpine]

Just rescued an old 360 and thought I'd flash the drive, as it turns out its a Liteon drive

I could go down the 360Lizard route but for just one drive would be so does anyone have experience with the solder/bridge r707 for key dumping? There are loads of tuts for this but they are all quite old and sketchy nothing complete.....

Any suggestions people..

[amp2006]

which LiteON is that ? i mean the version

and do you have 360 Xtractor ?

if you want to use solder then you could take a look over google for pics or in the JungleFlasher Tutorial its already on there

[billpine]

which LiteON is that ? i mean the version

and do you have 360 Xtractor ?

if you want to use solder then you could take a look over google for pics or in the JungleFlasher Tutorial its already on there

My bad, should have included that....

HW Ver A0A1 and FW Ver 74850C

Don't have a 360 xtractor, was kinda hoping to get the key without spending on a kit.....

[amp2006]

well in this case you need to build your own one and if you know how to do that or at least if you are similar with solder and other stuff then google it for how to make it.but trust me get an Xtractor or any similar hardware .its not cost too much .

[froid_san]

google POGO MO THOIN it's a DIY solderlles solution for modding phat liteon drives, just need a single capacitor and a couple of wires.

i also made one without the use of a capacitor

and just download the latest jungleflasher for xbox 360 it includes a PDF document of the step by set process of modding your drive it's very noob friendly.

just be sure you have the right/compatible SATA chipset

[billpine]

Guess I'll just buy a probe.

Thanks all..