ESR - bug reports

[ffgriever]

Please, only bug reports in this thread.

Give as much details as possible:

Steps you took to make the image, patch it and burn. Console model and region, game name and region. Game ID and iop replacement image version it uses, steps that will be helpful to reproduce the bug, what colors flashed on screen and how many times (red, green, blue, cyan, magenta, yellow, white).

I'll try to fix everything as soon as possible, but take a note, that I'm rather busy man.


Mods:

I have a favor to ask... could you delete (or move to the other topic) all unrelated posts in this thread?

Thank you.

[coolaan]

Ok I dont know if I should post this as a bug.....

PS2 Model : SCPH 77006
Custom 75k DVDELF using Neme's 1.3 small loader using ffg's init.irx

I tried loading USBADVANCE as BOOT.ELF as mc0:/BOOT/BOOT.ELF using the mc version. The screen flashed red,blue and then stayed on pink. No change....

[atchuss]

FreeMCBoot v1.4 / 75kb
Console: PAL-EUR, v7 39004
uLaunch 4.12, disc control on
Patcher: Memento patcher v0.9e

GAME: Chulip (NTSC SLUS_207.42)
IOPRP243.IMG
CD game patched to DVD
Tested & working with Memento 1.2e
It don't work with ESR
Colors flases very quickly, but I thing it is:
Red, Blue, Pink, White, Cyan

EDIT: Tested 007 Nightfire also with IOPRP243.IMG and it don't work either.

[Bahamut]

FreeMCBoot version/elf: v1.4 / 75kb
ESR: DVD Direct.elf (v0.6b)
Console: PAL-E, PS2 SLIM SCPH-70004b
uLaunch 4.15, Disc Control ON

Game: Shadow Hearts
Region: PAL-E
Code: SLES_508.22
Patcher: Memento patcher v0.9b (i cant remember at all because i had another copy with the old memento patcher and i dont wich is wich, but i think it was the last patcher)
Media: DVD-R Verbatim 16x

Colors (it was hard to remember the colors because some are very fast!):
RED(very fast), BLUE(very fast), MAGENTA(slow), LIGHT BLUE(slow)

Result: It works but it gets a lof of time to load (like 30 seconds) till you get the colors and just then the game starts, but is very frecuent that it hangs up when you enter or finish a battle so it's not playable at all. I think it is good because it works at least and with Memor32 it did not work (i think that with memor32 the ntsc version works but not the pal version).

[qwerty159]

I'm not sure if this is a bug, or intended behaviour but when launching ESR via a key from FMCB 1.4b with 75kb dvdelf (R2 if it matters) then I just get a white screen, no other colours.

I've only tried one game - Tekken 5 USA, on a PAL 39003 console. Patched with memento patcher 0.9e.

If I allow uLE to load (R1 button) and then manually load ESR the game boots fine.

Game: Tekken 5
ID: SLUS_210.59 - IOPRP300.IMG

[ghostboy78]

Scarface: The World is Yours (NTSC)

Free MC Boot v1.4 - Installed on Slim ps2 SCPH-75000 with DVDELF.BIN
Tested PS2s (NTSC) - Slim PS2 (SCPH-75000) and Fat PS2 (SCPH-39000R).
ESR: Public Beta 0.6b
Game Dumped/Burned with: Alcohol 120%
Patcher: Memento Patcher 0.9e
Iop Replacement Image: IOPRP280.IMG

SYSTEM.CNF

BOOT2 = cdrom0:\SLUS_211.11;
VER = 1.00
VMODE = NTSC

Problem:
I don't know why it does this, but the magenta screen still hangs on loading the game for both my fat and slim ps2. No other colors are flashed, just directly shows magenta and sticks there.

Other notes?:
I don't know if this is helpful or not, but this game happens to be a "problem" disk when it comes to loading it with Swap Magic v3.6. If I wanted to load this game on my PS2, I would have to load Swap Magic and then Zone Loader, and then Scarface and it would run fine.

How I Made the Image:
Using Alcohol 120%, I dumped the game to my hard drive at maximum speed as a .ISO image, patched it using Memento Patcher v0.9e, and then burned it at 4.0x speed.

[ffgriever]

I'm not sure if this is a bug, or intended behaviour but when launching ESR via a key from FMCB 1.4b with 75kb dvdelf (R2 if it matters) then I just get a white screen, no other colours.

I've only tried one game - Tekken 5 USA, on a PAL 39003 console. Patched with memento patcher 0.9e.

If I allow uLE to load (R1 button) and then manually load ESR the game boots fine.

Game: Tekken 5
ID: SLUS_210.59 - IOPRP300.IMG

White screen at the very beginning of the start procedure means that either system.cnf or executable couldn't be found on the disc. It's either some initialization problems or something else plays tricks. But most likely this problem occurs because your disc isn't properly recognized to the time when ESR tries to read it. Try using the big dvdelf, this should delay the process a little bit and give the drive time to finish the recognition (probably a little bit worn out/dirty laser unit in your console or invalid calibration data written to nvram). If this is really the case, then it should be easily fixed by waiting for the disc to be recognized first.

[skidbk]

Working in r8 under DVDV Direct, DVDV Direct Off and MCard.

In versions prior to r8, hangs at black screen. Game is not compatible with HDLoader. The DVDV can be browsed in uLE. The image works in PCSX2.


*ESR06b, 07a, 07b, 8 both DVDV Direct and MCard
*SCPH-30002R PAL Oceania
*Time Crisis: Crisis Zone (SLUS_209.27 NTSC IOPRP.IMG)
*Free MC Boot 1.4, 75K, Light Loader
*Memento Disc Patcher 0.9e, Ripped with DVD Decrypter, Burnt with Nero
*Disc Media SONY08D1, Burned at 12X, Book Type DVD-R
*uLE 4.12 Disc Control ON

[qwerty159]

White screen at the very beginning of the start procedure means that either system.cnf or executable couldn't be found on the disc. It's either some initialization problems or something else plays tricks. But most likely this problem occurs because your disc isn't properly recognized to the time when ESR tries to read it. Try using the big dvdelf, this should delay the process a little bit and give the drive time to finish the recognition (probably a little bit worn out/dirty laser unit in your console or invalid calibration data written to nvram). If this is really the case, then it should be easily fixed by waiting for the disc to be recognized first.

Thanks for that, I'll give the large dvdelf a try in the morning. I don't think it is the laser as it has virtually never been used (always used hdl on this console) and can play DVD-R's burned at 8-16x with no probs. if it is invalid calibration data is there anyway for me to fix that?

thanks again

[Leo15]

Non Working Games ESR: DVD Direct.elf (v0.6b)
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

System Version: SCPH75001 (USA) (Version 14)
Game/Region:
Spider- Man Friend Or Foe / (NTSC/UC) / (SLUS_216.00) / (IOPRP300.img)
Running on:
Free MC Boot Version 1.4 (with 75k DVDELF) (ULE 4.13 Disc Control On)
Memento Disc Patcher (FW 1.1)
Screen Problem: Hangs at First Black Screen (NO OTHER COLORS ARE SEEN)
Media used: DVD-R (Memorex) (RITEKF1) (Second Class Media)
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

System Version: SCPH75001 (USA) (Version 14)
Game/Region:
Scarface The World Is Yours / (NTSC/UC) / (SLUS_211.11) / (IOPRP280.img)
Running on:
Free MC Boot Version 1.4 (with 75k DVDELF) (ULE 4.13 Disc Control On)
Memento Disc Patcher (FW 1.1)
Screen Problem: Hangs at Magenta Screen
Media used: DVD+R (VERBATIM) (MCCOO4) (First Class Media)
*This one works with Memento*