ok, tried bridging those e capacitors and that burnt orange thing in one diagrma, didnt change a thing, so then i jumped the + side of the yellow cable to the burnt orange block object to the right of the capacitors which is supposed to be the + video output. i jus soldered a glob that had the tiny copy wire connecting the burnt orange cube onto the solder pad it was attached to with the cable that was soldered to it, left the - cable connected on bottonm. they are deffinetly conneted securely, i jus cant get the damn video to work, it pisses me off SOOO MUCH
also when it starts up, the dvd drive stays green tilll it figures out that no dvd or hardrive is connected (like 10 seconds), then it'll flash the error code. but it works like anormal xbox without video! audio icrystal perfect
my new pc:
-Pentium 4/ 3.0E GHz 800MHz FSP, 1MB L1 Cache, Hyperthreading
-ASUS P4S800 SiS648FX Chipset Motherboard
-2x 512MB Corsair Value Select DDR PC-3200
-BFG Geforce 6800 GT 256mb GDDR3 370MHz core clock
-NEC 2510a DVD Burner with Herrie's 1.07Beta5 firmware for: bitsetting, RPC1, RipLock, speedup, and additional media compatibility
-Thermaltake Silent Purepower 480W power supply
-Lian-Li Silver ATX Mid Tower Case, Model "PC-V1000"
- SB5100 and SB4200 cable modems connected using wingate to get double the bandwith
PS2: V9 with D MS3 chip - thanks Necrolop!
Main Xbox: V 1.0 in limited edition halo case, with Samsung DVD, upgraded 20 gig HD, and tsop flash X2 4981 bios
2nd Xbox: V 1.5 with Samsung DVD and tsop flash X2 4981 bios
xbox mod installer/tsop flasher in MASS!
lots of refs, IM me at modman860 on AIM for more info