The above video goes away if you are a member and logged in, so log in now!
Pal and NTSC
Pal and NTSC –
How install FMSB in a memory card to boot with it in PS2 Pal and other one NTSC ????
Its FMCB, not FMSB.....
You need a PAL ps2 for the PAL install and a NTSC for the NTSC install. If your trying to install both regions on the same MC, you can try installing from one region first, then COPY the B?EXEC-SYSTEM folder to a USB device, then go to the other region console and install that region. After the install, copy the B?EXEC-SYSTEM back into the MC from the USB you copied it to. A copy of an install only works on the MC it was installed from.
You should have a BAEXEC-SYSTEM and a BEEXEC-SYSTEM folder on your MC now. This should work, but i have not tried it as i only have NTSC consoles. This will also use up MC space if you do a Multi-Install for both consoles, so be sure to use a MC with enough space for both.
SCPH-30001 [V4] - unmodded (2)
SCPH-30001-R [V5] DMS4 Pro SE
SCPH-50001-N [V9] CC 2.0 SLE
SCPH-79001 [V16] Silver - unmodded
i tried the Multi-installa but not thing ...
i will try your method