Need some help.
I bought a new SCPH-90002 slimline console as my old SCPH-30002 has a dead laser. I had been using FMCB 1.7 on that console with a multi install. Both consoles are from the same region but FMCB won't work in the new console. I have tried formatting the card and reinstalling 1.7 with the multi install to no avail. Does anyone know of a way to get it to work for the new console.
Thanks in advance for any help.
unfortunately due sony change the bios in 90000 series makes currently FMCB unuseable
Hmmm interesting because the new slim my friend has works with it didn't check his model number though. Will 1.8 work with the 90002 does anyone know?
In the new PStwo BIOS for those models, Sony have disabled the methods that allowed the OSDSYS Browser and the DVD-Player to be updated by files on the MC. Those are the same methods that both FMCB and the Memento firmware rely on for booting backups and homebrews. I think it is clear that this was a direct response by Sony to the existence of such commercial 'softmods' as Memor32 with Memento firmware, intended to kill them off.
Originally Posted by Darth[SW]
Unfortunately the effect on FMCB is the same, so in all likelihood the PStwo models with this new BIOS version will never be able to boot any future version of FMCB.
Best regards: dlanor
Well,... (but) Not all 90ks have the same BIOS-Version. :)
Some still use V220 and on them it will work, but you need to be a lucky one, to get one of those.
Guess i'm one of the unlucky ones then thanks for the help.